Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 240-pin DDR3L server DIMMs with black chips

A-Tech

A-Tech 64GB (2x32GB) DDR3L 1600 ECC LRDIMM 4Rx4 1.35V Server RAM

SKU CH-YJHY-EY761

A 64 GB dual-channel kit of DDR3L 1600 ECC load-reduced server memory running at 1.35 V

  • Capacity64GB (2 x 32GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredLoad Reduced

Capacity 64GB (2 x 32GB)

  • 64 GB total capacity from two 32 GB modules
  • DDR3L 1600 MHz speed with CL11 latency
  • ECC load-reduced DIMM for server reliability
  • 35 V low-voltage operation reduces power draw
  • 240-pin quad-rank design fits compatible DDR3 servers

Server-grade DDR3L ECC LRDIMM kit

This 64GB kit contains two 32GB DDR3L 1600 modules built for servers and workstations that require ECC load-reduced memory. Each module uses a 240-pin DIMM form factor with a quad-rank x4 organisation and runs at 1.35V low voltage. It is not compatible with desktop or laptop computers.

Sustained-load behaviour with load-reduced ECC

The load-reduced design lowers electrical load on the memory bus, helping maintain signal integrity when all slots are populated under continuous workloads. ECC protection corrects single-bit errors on the fly, while the CL11 latency and 1600 MHz speed deliver steady throughput for virtualisation and database tasks.

Installation notes and common issues

Modules install in standard 240-pin DDR3 DIMM slots, but the system must explicitly support DDR3L ECC LRDIMM technology; many boards that accept regular registered ECC will not recognise these quad-rank modules. Verify the qualified vendor list and follow the manufacturer's channel-population rules before seating the pair.

Kohokohdat

  • 64 GB total capacity from two 32 GB modules
  • DDR3L 1600 MHz speed with CL11 latency
  • ECC load-reduced DIMM for server reliability
  • 35 V low-voltage operation reduces power draw
  • 240-pin quad-rank design fits compatible DDR3 servers

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 32GB 4Rx4 PC3L-12800L
Capacity64GB (2 x 32GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does the 1.35V DDR3L LRDIMM kit draw under continuous server workloads?

Each 32GB module operates at 1.35V, so the dual-channel 64GB kit runs at the low-voltage DDR3L level to reduce heat and power draw during all-day operation.

What motherboard slot and chipset support do I need to install these 240-pin ECC LRDIMMs?

You need a server or workstation board with DDR3 ECC LRDIMM support, 240-pin DIMM slots, and a memory controller that accepts 4Rx4 quad-rank modules at 1600 MHz.

Can I mix these 4Rx4 LRDIMMs with standard 2Rx4 registered DIMMs already in my system?

No — load-reduced and registered DIMM types cannot be mixed; the memory controller requires identical rank and buffer architecture across all populated channels.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.