A-Tech 32GB DDR3L 1600 ECC LRDIMM 4Rx4 1.35V 240-Pin Server RAM
- 32GB
- DDR3L 1600 (PC3L 12…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR3L 1333 MHz ECC Load Reduced DIMM with 240 pins, 1.35 V and quad-rank x4 organisation for compatible servers
Capacity 32GB
This 32 GB DDR3L 1333 MHz module is built for servers and workstations that require ECC load-reduced memory. It operates at 1.35 V and uses a 240-pin DIMM form factor with a 4Rx4 quad-rank x4 organisation. The CL9 latency and PC3L-10600L rating suit enterprise platforms designed for registered LRDIMMs.
Replacing smaller LRDIMMs with this 32 GB stick increases total memory per channel while keeping the same 1333 MHz speed and 1.35 V voltage. The jump is worth it when the platform supports quad-rank x4 modules and the workload benefits from higher density without changing memory frequency or voltage.
The 32 GB capacity provides headroom for multiple virtual machines, large in-memory databases and heavy multitasking on compatible DDR3 servers. It runs out when the system's maximum supported memory per slot or per channel is lower than 32 GB, or when the platform does not accept load-reduced quad-rank modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 32GB 4Rx4 PC3L-10600L |
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module uses a standard 240-pin DDR3 DIMM form factor and requires a server or workstation motherboard that supports DDR3L ECC Load Reduced memory.
Power down the system, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then follow the motherboard manual for channel population order.
Replace the module if the system reports uncorrectable ECC errors, fails memory diagnostics, or becomes unstable under load; otherwise it is rated for continuous server operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?