A-Tech 32GB DDR3L 1600 ECC LRDIMM 4Rx4 1.35V 240-Pin Server RAM
- 32GB
- DDR3L 1600 (PC3L 12…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR3L 1333 MHz ECC Load Reduced DIMM with 240 pins, 1.35 V and quad-rank x4 organisation for compatible servers
Capacity 32GB
This 32 GB DDR3L 1333 MHz module is built for servers and workstations that require ECC load-reduced memory. It operates at 1.35 V and uses a 240-pin DIMM form factor with a 4Rx4 quad-rank x4 organisation. The CL9 latency and PC3L-10600L rating suit enterprise platforms designed for registered LRDIMMs.
Replacing smaller LRDIMMs with this 32 GB stick increases total memory per channel while keeping the same 1333 MHz speed and 1.35 V voltage. The jump is worth it when the platform supports quad-rank x4 modules and the workload benefits from higher density without changing memory frequency or voltage.
The 32 GB capacity provides headroom for multiple virtual machines, large in-memory databases and heavy multitasking on compatible DDR3 servers. It runs out when the system's maximum supported memory per slot or per channel is lower than 32 GB, or when the platform does not accept load-reduced quad-rank modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 32GB 4Rx4 PC3L-10600L |
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module uses a standard 240-pin DDR3 DIMM form factor and requires a server or workstation motherboard that supports DDR3L ECC Load Reduced memory.
Power down the system, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then follow the motherboard manual for channel population order.
Replace the module if the system reports uncorrectable ECC errors, fails memory diagnostics, or becomes unstable under load; otherwise it is rated for continuous server operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟