A-Tech 32GB DDR3L 1600 ECC LRDIMM 4Rx4 1.35V 240-Pin Server RAM
- 32GB
- DDR3L 1600 (PC3L 12…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
32 GB DDR3L 1333 MHz ECC Load Reduced DIMM with 240 pins, 1.35 V and quad-rank x4 organisation for compatible servers
Capacity 32GB
This 32 GB DDR3L 1333 MHz module is built for servers and workstations that require ECC load-reduced memory. It operates at 1.35 V and uses a 240-pin DIMM form factor with a 4Rx4 quad-rank x4 organisation. The CL9 latency and PC3L-10600L rating suit enterprise platforms designed for registered LRDIMMs.
Replacing smaller LRDIMMs with this 32 GB stick increases total memory per channel while keeping the same 1333 MHz speed and 1.35 V voltage. The jump is worth it when the platform supports quad-rank x4 modules and the workload benefits from higher density without changing memory frequency or voltage.
The 32 GB capacity provides headroom for multiple virtual machines, large in-memory databases and heavy multitasking on compatible DDR3 servers. It runs out when the system's maximum supported memory per slot or per channel is lower than 32 GB, or when the platform does not accept load-reduced quad-rank modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 32GB 4Rx4 PC3L-10600L |
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The module uses a standard 240-pin DDR3 DIMM form factor and requires a server or workstation motherboard that supports DDR3L ECC Load Reduced memory.
Power down the system, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then follow the motherboard manual for channel population order.
Replace the module if the system reports uncorrectable ECC errors, fails memory diagnostics, or becomes unstable under load; otherwise it is rated for continuous server operation.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม