Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR4 RDIMM modules with gold contacts and black heat spreaders in a kit box

A-Tech

A-Tech 64GB (8x8GB) DDR4 2400 ECC RDIMM 2Rx8 1.2V CL17 server RAM

SKU CH-SJ3N-QE0EZ

Eight 8 GB DDR4 registered ECC DIMMs running at 2400 MHz with CL17 latency and 1.2 V for server and workstation upgrades

  • Capacity64GB (8 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (8 x 8GB)

  • 64 GB kit expands server memory capacity for heavier workloads
  • ECC registered design detects and corrects data errors in critical applications
  • Dual-rank 2Rx8 organisation increases memory density per channel
  • DDR4 2400 speed with CL17 latency delivers responsive throughput
  • 2 V standard voltage reduces power draw per module

Server ECC RDIMM kit

This A-Tech 64GB kit contains eight 8GB DDR4 2400 registered ECC modules built for servers and workstations. Each stick runs at 1.2V with CL17 latency and a dual-rank 2Rx8 layout. The 288-pin DIMM form factor fits DDR4 registered memory slots only.

Verify registered DDR4 support

Check that your system explicitly supports DDR4 registered ECC RDIMM memory before ordering. Desktop and laptop platforms cannot use these modules. Consult the motherboard or server manual for approved memory configurations, population rules and maximum capacity per channel.

Replaces non-ECC or lower-capacity DDR4 RDIMMs

The upgrade is worthwhile when your workload needs error correction, higher density or both. If the current hardware already runs registered ECC DDR4 at 2400 MHz with sufficient capacity, the performance gain will be minimal.

Kohokohdat

  • 64 GB kit expands server memory capacity for heavier workloads
  • ECC registered design detects and corrects data errors in critical applications
  • Dual-rank 2Rx8 organisation increases memory density per channel
  • DDR4 2400 speed with CL17 latency delivers responsive throughput
  • 2 V standard voltage reduces power draw per module

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC4-2400T-R
Capacity64GB (8 x 8GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes inside the 64GB kit and is anything else required for installation?

The kit contains eight 8GB DDR4 2400 ECC registered DIMM modules. No extra parts are needed beyond a server or workstation motherboard with 288-pin DDR4 RDIMM slots.

How do I decide between this 64GB kit and a smaller or larger capacity option?

Choose this 64GB kit when your workload needs eight dual-rank 8GB modules running at 2400 MHz with CL17 latency; select a different kit only if your system's maximum supported capacity or channel population rules require a different total.

What does the 2400 MHz rating mean once the modules are running in my server?

The modules operate at DDR4 2400 (PC4-19200) with CL17 timing at 1.2V, delivering the rated bandwidth and latency as long as the platform's memory controller supports that speed and the DIMMs are populated according to the system's channel guidelines.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.