Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 64GB 8x8GB DDR3 1333 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-9M1Q-M01FK

Eight-module kit provides 64 GB of DDR3 1333 ECC unbuffered server memory at 1.5 V

  • Capacity64GB (8 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 64GB (8 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 64 GB kit with eight 8 GB modules expands server memory capacity
  • DDR3 1333 MHz speed with CL9 latency accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 5 V standard voltage ensures broad DDR3 platform compatibility

64 GB ECC UDIMM kit for servers

This 64 GB kit contains eight 8 GB DDR3 1333 MHz modules built to the PC3-10600E standard. Each stick is an unbuffered ECC DIMM with a 2Rx8 organisation and runs at the standard 1.5 V. The 240-pin form factor fits server and workstation platforms that specify DDR3 ECC unbuffered memory.

Suits administrators expanding compatible DDR3

The kit is designed for servers and workstations that accept DDR3 ECC unbuffered DIMMs at 1333 MHz. It will not work in desktop or laptop computers, nor in systems that require registered or load-reduced modules. Buyers needing higher speeds, different voltages or non-ECC memory should look at other products.

Eight-module population fills all slots on many

The package delivers exactly eight 8 GB sticks, so it can fully populate an eight-slot motherboard in a single purchase. Verify the maximum supported capacity per slot and the correct channel configuration in the system manual before installing.

Kohokohdat

  • 64 GB kit with eight 8 GB modules expands server memory capacity
  • DDR3 1333 MHz speed with CL9 latency accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-10600E
Capacity64GB (8 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I confirm the kit is running at 1333 MHz with ECC active after installation?

Enter the system BIOS or UEFI and verify the memory speed reads 1333 MHz and that ECC is shown as enabled.

What modules and accessories are included in the 64GB kit?

The kit contains eight 8GB DDR3 ECC UDIMM modules; no extra cables, brackets or software are supplied.

Should I choose this 2Rx8 1.5V kit or a different rank or voltage for my server?

Select this kit only if your server or workstation requires DDR3 1333 MHz ECC unbuffered 2Rx8 DIMMs at 1.5V; otherwise check the system manual for the supported rank and voltage.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.