NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
Eight 8 GB DDR4 ECC UDIMM modules running at 2400 MHz with CL17 latency and 1.2 V for server workloads
This A-Tech kit supplies 64GB of DDR4 ECC unbuffered memory in eight 8GB modules. It targets administrators upgrading compatible servers or workstations that require error-correcting DIMMs. Desktop and laptop platforms are not supported by this specification.
The modules run at DDR4 2400 (PC4-19200) with a CL17 latency and 1.20V operation. Bandwidth and timing are fixed by the DDR4 2400 standard; systems that only accept lower speeds will down-clock the kit automatically.
Each 288-pin DIMM uses a 1Rx8 single-rank layout without a heat spreader. The unbuffered design suits motherboards wired for UDIMM topology; registered or load-reduced slots will not accept these modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 8GB 1Rx8 PC4-2400T-E |
| Part Number | AT8G8D4D2400US8N12V |
| Capacity | 64GB (8 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server & Workstation Systems |
The 8×8 GB kit provides a matched 64 GB set of single-rank ECC UDIMMs tested together for multi-channel server boards.
Rated at 2400 MT/s with CL17 timing, the kit runs at standard 1.2 V to supply error-corrected bandwidth for typical DDR4 server workloads.
PC4-19200 is the JEDEC bandwidth rating for DDR4 2400; the modules are 288-pin ECC UDIMMs keyed for DDR4 server and workstation boards only.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?