Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR3 1333MHz ECC RDIMM 2Rx4 240-Pin Server Memory

SKU CH-FNGX-1Q4V7

Supermicro certified 8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 dual-rank organisation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • 8 GB DDR3 1333 MHz registered ECC for data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 50 V standard voltage matches DDR3 platform requirements
  • 240-pin RDIMM form factor fits registered DIMM slots

Server Memory for Supermicro Platforms

This 8 GB DDR3 RDIMM is built for Supermicro servers that require registered ECC memory. It suits administrators upgrading or repairing compatible rack-mount and tower systems where data integrity is mandatory.

8 GB Capacity with Registered ECC

The single module delivers 8 GB at 1333 MHz with CL9 latency and 1.5 V operation. Dual-rank 2Rx4 organisation provides density for multi-DIMM configurations, while registered signalling and ECC protect against data corruption under sustained workloads.

DDR3 1333 Interface Limits

The PC3-10600 interface tops out at 1333 MT/s, so bandwidth is capped for modern multi-core processors. Systems requiring higher throughput or newer DDR generations cannot use this module, and mixed-speed populations will downclock to the slowest installed DIMM.

Kohokohdat

  • Supermicro certified for validated server compatibility
  • 8 GB DDR3 1333 MHz registered ECC for data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 50 V standard voltage matches DDR3 platform requirements
  • 240-pin RDIMM form factor fits registered DIMM slots

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR380L-HL03-ER13
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR380L-HL03-ER13 (HMT31GR7BFR4C-H9)

Kysymyksiä tästä tuotteesta

Will this DDR3 1333MHz ECC RDIMM run alongside older DDR3 modules in the same server?

Mixing memory speeds forces all modules to operate at the speed of the slowest installed DIMM, so verify your existing modules match the PC3-10600 rating for best stability.

How can I confirm this Supermicro Certified MEM-DR380L-HL03-ER13 module is working correctly after installation?

The module will appear as an 8GB DDR3 1333MHz ECC Registered DIMM in the system BIOS or OS memory report, and the server should pass a full memory test without errors.

What is included with this 240-pin RDIMM and what must be purchased separately?

The box contains one 8GB Hynix HMT31GR7BFR4C-H9 2Rx4 DDR3 1333MHz ECC RDIMM; no additional cables, brackets or software are required or supplied.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.