Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

A-Tech

A-Tech 8GB DDR3 1333MHz ECC RDIMM 2Rx4 240-Pin Server Memory

SKU CH-FNGX-1Q4V7

Supermicro certified 8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 dual-rank organisation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • 8 GB DDR3 1333 MHz registered ECC for data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 50 V standard voltage matches DDR3 platform requirements
  • 240-pin RDIMM form factor fits registered DIMM slots

Server Memory for Supermicro Platforms

This 8 GB DDR3 RDIMM is built for Supermicro servers that require registered ECC memory. It suits administrators upgrading or repairing compatible rack-mount and tower systems where data integrity is mandatory.

8 GB Capacity with Registered ECC

The single module delivers 8 GB at 1333 MHz with CL9 latency and 1.5 V operation. Dual-rank 2Rx4 organisation provides density for multi-DIMM configurations, while registered signalling and ECC protect against data corruption under sustained workloads.

DDR3 1333 Interface Limits

The PC3-10600 interface tops out at 1333 MT/s, so bandwidth is capped for modern multi-core processors. Systems requiring higher throughput or newer DDR generations cannot use this module, and mixed-speed populations will downclock to the slowest installed DIMM.

Přednosti

  • Supermicro certified for validated server compatibility
  • 8 GB DDR3 1333 MHz registered ECC for data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 50 V standard voltage matches DDR3 platform requirements
  • 240-pin RDIMM form factor fits registered DIMM slots

Specifikace

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR380L-HL03-ER13
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR380L-HL03-ER13 (HMT31GR7BFR4C-H9)

Otázky k tomuto produktu

Will this DDR3 1333MHz ECC RDIMM run alongside older DDR3 modules in the same server?

Mixing memory speeds forces all modules to operate at the speed of the slowest installed DIMM, so verify your existing modules match the PC3-10600 rating for best stability.

How can I confirm this Supermicro Certified MEM-DR380L-HL03-ER13 module is working correctly after installation?

The module will appear as an 8GB DDR3 1333MHz ECC Registered DIMM in the system BIOS or OS memory report, and the server should pass a full memory test without errors.

What is included with this 240-pin RDIMM and what must be purchased separately?

The box contains one 8GB Hynix HMT31GR7BFR4C-H9 2Rx4 DDR3 1333MHz ECC RDIMM; no additional cables, brackets or software are required or supplied.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.