NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for Dell 370-AAVV servers
This 8 GB module runs at DDR3 1600 (PC3-12800) with CL11 latency and 1.50 V standard voltage. It is a 1Rx4 registered ECC DIMM built with major-brand chips for Dell 370-AAVV server and workstation platforms. The 240-pin form factor fits compatible DDR3 slots in enterprise systems. Buyers who need a different capacity, speed, or unbuffered memory should look elsewhere.
Operating at the standard 1.50 V DDR3 voltage keeps power draw within normal limits for registered server memory. The module produces no audible noise because it has no moving parts. Heat output is typical for a single 8 GB DDR3 RDIMM under everyday workloads. Systems without adequate airflow for populated DIMM slots may run warmer.
Quality-assurance testing validates dependable performance during extended server and workstation sessions. Registered buffering and ECC correction maintain data integrity when the module handles continuous multi-threaded workloads. The major-brand chipset supports stable operation over long periods without throttling. Workloads that exceed the 8 GB capacity of a single module will require additional compatible DIMMs.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Power down, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module registers at 1600MHz with ECC active.
No routine maintenance is required; the module either runs reliably for the system's life or fails outright, at which point you replace it with another DDR3 1600 ECC RDIMM of matching rank and voltage.
The 1600MHz DDR3 bus bandwidth and CL11 latency ceiling become the bottleneck before the 1.50V thermal envelope, capping sustained throughput on memory-intensive server tasks.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?