NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8GB DDR3L 1333 ECC registered DIMM with 2Rx4 organisation and 1.35V low-voltage operation
This is an A-Tech 8GB DDR3L 1333MHz PC3L-10600 ECC Registered DIMM built with major brand chips. It operates at 1.35V low voltage with CL9 latency and a 2Rx4 rank configuration on a 240-pin form factor. The module is designed for server and workstation systems requiring registered error-correcting memory.
This memory replaces HP part numbers including A0R58A, 731656-081, 604506-S21, 664690-001, 698889-001, 647875-B21, 605313-071, 647649-171, 647650-07H and 687460-001. It is not suitable for systems that only accept unbuffered non-ECC UDIMMs. Builders needing different capacities, speeds or voltage specifications should verify their platform requirements before purchase.
The single specification that decides fit is the registered ECC RDIMM design with 2Rx4 rank organization. Systems requiring unbuffered UDIMMs, different rank configurations such as 1Rx8 or 2Rx8, or standard 1.5V DDR3 voltage will not support this module. Confirm the motherboard manual specifies DDR3L 1333MHz registered ECC 2Rx4 support.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module is a registered ECC RDIMM and requires a server or workstation board with a DDR3L memory controller that accepts registered ECC DIMMs.
No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC UDIMMs; the memory controller must run all slots in registered ECC mode.
Check the BIOS memory information or run a tool such as CPU-Z; it should show 1333 MHz, 1.35 V, CL9 timings and ECC enabled.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?