NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
8GB DDR3L 1333 ECC registered DIMM with 2Rx4 organisation and 1.35V low-voltage operation
This is an A-Tech 8GB DDR3L 1333MHz PC3L-10600 ECC Registered DIMM built with major brand chips. It operates at 1.35V low voltage with CL9 latency and a 2Rx4 rank configuration on a 240-pin form factor. The module is designed for server and workstation systems requiring registered error-correcting memory.
This memory replaces HP part numbers including A0R58A, 731656-081, 604506-S21, 664690-001, 698889-001, 647875-B21, 605313-071, 647649-171, 647650-07H and 687460-001. It is not suitable for systems that only accept unbuffered non-ECC UDIMMs. Builders needing different capacities, speeds or voltage specifications should verify their platform requirements before purchase.
The single specification that decides fit is the registered ECC RDIMM design with 2Rx4 rank organization. Systems requiring unbuffered UDIMMs, different rank configurations such as 1Rx8 or 2Rx8, or standard 1.5V DDR3 voltage will not support this module. Confirm the motherboard manual specifies DDR3L 1333MHz registered ECC 2Rx4 support.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module is a registered ECC RDIMM and requires a server or workstation board with a DDR3L memory controller that accepts registered ECC DIMMs.
No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC UDIMMs; the memory controller must run all slots in registered ECC mode.
Check the BIOS memory information or run a tool such as CPU-Z; it should show 1333 MHz, 1.35 V, CL9 timings and ECC enabled.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?