Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L server RDIMM with black memory chips and gold edge contacts

A-Tech

A-Tech 8GB DDR3L 1333 PC3L-10600 2Rx4 ECC RDIMM 1.35V Server RAM

SKU CH-ZDRY-1GXWY

An 8 GB DDR3L registered ECC module running at 1333 MHz with 1.35 V low voltage for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity lets servers handle heavier workloads
  • DDR3L 1333 speed matches PC3L-10600 system requirements
  • ECC registered design protects data integrity in critical applications
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots

Product Identity

This A-Tech module is an 8GB DDR3L 1333 registered ECC DIMM built for server and workstation platforms. It runs at 1.35V with CL9 latency and uses a 2Rx4 organisation on a 240-pin form factor.

Target Fit

It suits administrators upgrading or repairing systems that require low-voltage registered ECC memory at this speed and density. Buyers whose platforms need unbuffered UDIMMs, higher frequencies, different voltages or larger single-module capacities should look elsewhere.

Installation Notes

The 240-pin DIMM seats in standard DDR3 server slots; the key notch aligns only one way. Common issues include mixing registered and unbuffered modules, populating slots in an order the motherboard manual does not support, or exceeding the system's maximum supported density per slot.

Kohokohdat

  • 8GB capacity lets servers handle heavier workloads
  • DDR3L 1333 speed matches PC3L-10600 system requirements
  • ECC registered design protects data integrity in critical applications
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

My motherboard has 240-pin DDR3 slots — will this DDR3L 1.35V RDIMM seat and run in them?

The module uses the standard 240-pin DDR3 DIMM form factor and operates at 1.35 V DDR3L voltage; it will seat in any DDR3 DIMM slot that accepts registered ECC memory.

I plan to keep my existing Samsung M393B1K70CH0-YH9 sticks — can I mix them with this A-Tech 8 GB 2Rx4 CL9 module?

Both are DDR3L 1333 PC3L-10600 registered ECC 2Rx4 modules at 1.35 V with CL9 latency, so they share the same electrical and timing characteristics for mixed-population operation.

After installing the RDIMM, what BIOS indicator confirms it is running at the rated 1333 MT/s with ECC active?

In the memory information screen, verify the reported speed shows 1333 MT/s (PC3L-10600), the voltage reads 1.35 V, and the ECC status is reported as enabled or active.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.