Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3L server RDIMM with black memory chips and gold edge contacts

A-Tech

A-Tech 8GB DDR3L 1333 PC3L-10600 2Rx4 ECC RDIMM 1.35V Server RAM

SKU CH-ZDRY-1GXWY

An 8 GB DDR3L registered ECC module running at 1333 MHz with 1.35 V low voltage for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity lets servers handle heavier workloads
  • DDR3L 1333 speed matches PC3L-10600 system requirements
  • ECC registered design protects data integrity in critical applications
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots

Product Identity

This A-Tech module is an 8GB DDR3L 1333 registered ECC DIMM built for server and workstation platforms. It runs at 1.35V with CL9 latency and uses a 2Rx4 organisation on a 240-pin form factor.

Target Fit

It suits administrators upgrading or repairing systems that require low-voltage registered ECC memory at this speed and density. Buyers whose platforms need unbuffered UDIMMs, higher frequencies, different voltages or larger single-module capacities should look elsewhere.

Installation Notes

The 240-pin DIMM seats in standard DDR3 server slots; the key notch aligns only one way. Common issues include mixing registered and unbuffered modules, populating slots in an order the motherboard manual does not support, or exceeding the system's maximum supported density per slot.

Přednosti

  • 8GB capacity lets servers handle heavier workloads
  • DDR3L 1333 speed matches PC3L-10600 system requirements
  • ECC registered design protects data integrity in critical applications
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

My motherboard has 240-pin DDR3 slots — will this DDR3L 1.35V RDIMM seat and run in them?

The module uses the standard 240-pin DDR3 DIMM form factor and operates at 1.35 V DDR3L voltage; it will seat in any DDR3 DIMM slot that accepts registered ECC memory.

I plan to keep my existing Samsung M393B1K70CH0-YH9 sticks — can I mix them with this A-Tech 8 GB 2Rx4 CL9 module?

Both are DDR3L 1333 PC3L-10600 registered ECC 2Rx4 modules at 1.35 V with CL9 latency, so they share the same electrical and timing characteristics for mixed-population operation.

After installing the RDIMM, what BIOS indicator confirms it is running at the rated 1333 MT/s with ECC active?

In the memory information screen, verify the reported speed shows 1333 MT/s (PC3L-10600), the voltage reads 1.35 V, and the ECC status is reported as enabled or active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.