Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black brushed aluminum enclosure for 3.5 inch SATA IDE drives, rectangular with angular edges

Acasis

Acasis BA-06USI 3.5 inch SATA IDE USB 2.0 drive enclosure

SKU CH-NMMT-TNB6P

A 3.5-inch SATA and IDE hard-drive enclosure in aluminium-magnesium alloy with USB 2.1 interface and 12 V power adapter

  • ColorBlack
  • Supports 3.5 inch SATA and IDE drives
  • USB 2.0 interface for broad system compatibility
  • Aluminium-magnesium alloy shell dissipates heat quickly
  • 3 mm thick walls and security door protect the drive
  • 12 V 2000 mA certified power supply included

3.5 inch dual-use enclosure

The Acasis BA-06USI is an external enclosure built for a single 3.5 inch SATA or IDE hard drive. Its aluminum-magnesium alloy shell measures 206 by 111 by 30 millimetres and weighs 310 grams. A 12 volt 2000 milliamp power adapter with a US plug is included, along with an 80 centimetre USB cable. The unit connects to a host through a USB 2.1 interface.

Suits legacy drive access.

This enclosure suits users who need to read or write older 3.5 inch SATA or IDE drives on a modern computer. Driver-free operation is listed for Windows XP, Vista, 8 and 8.1. The USB 2.1 link limits transfer rates, so the enclosure is not a good fit for workflows that demand high sustained throughput or for builders who want to boot an operating system from the external drive.

USB 2.1 interface governs transfer speed

The single specification that decides suitability is the USB 2.1 host interface. It sets the maximum data rate for every drive installed in the enclosure, regardless of whether the drive itself is SATA or IDE. If the task requires faster external storage, a different connection standard will be necessary.

Kohokohdat

  • Supports 3.5 inch SATA and IDE drives
  • USB 2.0 interface for broad system compatibility
  • Aluminium-magnesium alloy shell dissipates heat quickly
  • 3 mm thick walls and security door protect the drive
  • 12 V 2000 mA certified power supply included

Tekniset tiedot

ColorBlack

Kysymyksiä tästä tuotteesta

Will the 3.5 inch SATA drive overheat inside the aluminum-magnesium alloy shell during long transfers?

The enclosure uses a 1.3 mm thick alloy shell that dissipates heat passively and is rated for an operating temperature of 5 to 40 degree.

How much noise or heat does the 12 V 2000 mA power adapter add when the enclosure runs all day?

The certified 12 V 2000 mA adapter powers the drive without a fan, so the unit stays silent and only warm within the 5 to 40 degree operating range.

Do I need a 3.5 inch SATA or IDE hard drive and a free USB 2.0 Type-A port to use this enclosure?

Yes, the enclosure accepts one 3.5 inch SATA or IDE drive and connects to the host via the included 80 cm USB 2.0 A-to-B cable.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.