Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black brushed aluminum enclosure for 3.5 inch SATA IDE drives, rectangular with angular edges

Acasis

Acasis BA-06USI 3.5 inch SATA IDE USB 2.0 drive enclosure

SKU CH-NMMT-TNB6P

A 3.5-inch SATA and IDE hard-drive enclosure in aluminium-magnesium alloy with USB 2.1 interface and 12 V power adapter

  • ColorBlack
  • Supports 3.5 inch SATA and IDE drives
  • USB 2.0 interface for broad system compatibility
  • Aluminium-magnesium alloy shell dissipates heat quickly
  • 3 mm thick walls and security door protect the drive
  • 12 V 2000 mA certified power supply included

3.5 inch dual-use enclosure

The Acasis BA-06USI is an external enclosure built for a single 3.5 inch SATA or IDE hard drive. Its aluminum-magnesium alloy shell measures 206 by 111 by 30 millimetres and weighs 310 grams. A 12 volt 2000 milliamp power adapter with a US plug is included, along with an 80 centimetre USB cable. The unit connects to a host through a USB 2.1 interface.

Suits legacy drive access.

This enclosure suits users who need to read or write older 3.5 inch SATA or IDE drives on a modern computer. Driver-free operation is listed for Windows XP, Vista, 8 and 8.1. The USB 2.1 link limits transfer rates, so the enclosure is not a good fit for workflows that demand high sustained throughput or for builders who want to boot an operating system from the external drive.

USB 2.1 interface governs transfer speed

The single specification that decides suitability is the USB 2.1 host interface. It sets the maximum data rate for every drive installed in the enclosure, regardless of whether the drive itself is SATA or IDE. If the task requires faster external storage, a different connection standard will be necessary.

Přednosti

  • Supports 3.5 inch SATA and IDE drives
  • USB 2.0 interface for broad system compatibility
  • Aluminium-magnesium alloy shell dissipates heat quickly
  • 3 mm thick walls and security door protect the drive
  • 12 V 2000 mA certified power supply included

Specifikace

ColorBlack

Otázky k tomuto produktu

Will the 3.5 inch SATA drive overheat inside the aluminum-magnesium alloy shell during long transfers?

The enclosure uses a 1.3 mm thick alloy shell that dissipates heat passively and is rated for an operating temperature of 5 to 40 degree.

How much noise or heat does the 12 V 2000 mA power adapter add when the enclosure runs all day?

The certified 12 V 2000 mA adapter powers the drive without a fan, so the unit stays silent and only warm within the 5 to 40 degree operating range.

Do I need a 3.5 inch SATA or IDE hard drive and a free USB 2.0 Type-A port to use this enclosure?

Yes, the enclosure accepts one 3.5 inch SATA or IDE drive and connects to the host via the included 80 cm USB 2.0 A-to-B cable.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.