Acumen Disc AD47-USB USB Duplicator 1 to 47 33MB/s
- USB Flash Drive Dup…
- 1 to 47
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Acumen Disc
Standalone USB duplicator copies one source to 87 targets at up to 35 MB/s with 128 MB buffer and DoD-compliant erase modes
The Acumen Disc AD87-USB duplicates one master USB flash drive to up to 87 targets simultaneously. It operates as a standalone unit with a 20 x 2 LCD menu and requires no host computer or software. The system accepts USB-IF compliant Type A drives at 1.0, 2.0 and 3.0 speeds and includes a 128M buffer for asynchronous copy cycles.
The unit runs from an AC supply rated 115-230 V at 50/60 Hz with no warm-up period. Each channel delivers up to 35 MB/s from the internal buffer, so sustained throughput depends on the media rather than a shared bus. Standalone operation eliminates host-generated heat and fan noise in the workflow.
This duplicator replaces the process of plugging drives into a computer one by one or running multiple software instances. The jump is worth it when you need DoD 3-pass or 7-pass sanitisation to 5220.22-M standards, quick-copy or full-media modes, and automatic FAT or FAT32 formatting across dozens of drives per cycle. It does not support externally connected USB devices such as hard drives or hubs.
| Brand | Acumen Disc |
|---|---|
| Model | Acumen Disc USB |
| Part Number | AD87-USB |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 87 |
| Buffer Memory | 128M |
| Supported Media | USB Flash Memory Drive (Pen Drive only, not available for external USB connected devices) |
| Data Transfer Rate | 33MB/s |
| Data Source ROM | 1 USB Slot for Source Reading |
| Data Destination Burner | 87 USB Slots for USB to USB Copy |
| Language Support | English / Spanish / French / Japanese |
| Display | 20 x 2 LCD |
| Operating Type | Standalone |
| Connector | USB |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Connect the unit to a 115-230 V, 50/60 Hz AC supply, insert the source drive into the single source slot, load up to 87 target drives into the destination slots, then select the copy mode on the 20 x 2 LCD — the step often missed is confirming the correct erase or format option before starting.
The duplicator has no user-serviceable parts; keep the 87 USB slots and the single source slot free of dust, and verify the 128 MB buffer memory functions during each copy cycle — no scheduled consumable replacement is required.
The 33 MB/s data transfer rate and the 128 MB built-in buffer set the throughput ceiling; each of the 87 channels shares this bandwidth, so sustained bulk duplication speed is limited by the buffer and the rated transfer rate.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?