Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver tower with seven disc trays, front card slots and small LCD display

Acumen Disc

Acumen Disc CrossOver BD AD07-MMPBD 1-7 target Blu-Ray duplicator

SKU CH-DWJR-9X3X1

A standalone duplicator that copies between flash memory cards, USB drives and optical discs at up to 52X CD and 16X Blu-ray speeds across seven target drives

  • TypeMultimedia Duplicator
  • Target1 to 7
  • ControllerAcumen Disc
  • Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD
  • Data Transfer Rate33MB/s
  • CD-R52X

Targets 1 to 7

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option Crossover BD

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Copies 7 discs at once from one source disc
  • Converts flash cards to Blu-Ray at 16X speed
  • Reads USB, CF, SD and Memory Stick cards
  • Standalone operation with 20×2 LCD and no PC needed
  • Writes CD-R at 52X, DVD±R at 24X, BD-R at 16X

Standalone multi-media duplicator

The Acumen Disc CrossOver BD AD07-MMPBD copies data between flash memory cards, USB drives and optical discs without a host computer. It reads from CompactFlash, Secure Digital, Memory Stick or USB sources and writes to up to seven CD, DVD or Blu-ray targets simultaneously. The unit also supports flash-to-flash and disc-to-flash workflows for archive or distribution tasks.

Thermal and power profile

The duplicator runs as a self-contained tower with an integrated controller and seven writer drives. No external software or PC connection is required, so power draw is limited to the internal power supply and drive motors during copy operations. A 20 x 2 character LCD reports status and progress while the machine runs quietly in an office or lab environment.

7-target Blu-ray write speed

Blu-ray Recordable discs write at 16X and dual-layer BD-R at 8X, while DVD+R reaches 24X and CD-R peaks at 52X. The single reader handles source discs or flash media at up to 33 MB/s. Buyers who need more than seven simultaneous disc targets or faster Blu-ray write rates should consider a higher-capacity production duplicator.

Kohokohdat

  • Copies 7 discs at once from one source disc
  • Converts flash cards to Blu-Ray at 16X speed
  • Reads USB, CF, SD and Memory Stick cards
  • Standalone operation with 20×2 LCD and no PC needed
  • Writes CD-R at 52X, DVD±R at 24X, BD-R at 16X

Tekniset tiedot

BrandAcumen Disc
ModelCrossOver BD
Part NumberAD07-MMPBD
TypeMultimedia Duplicator
Target1 to 7
ControllerAcumen Disc
Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD) / Memory Stick (MS)
Data Transfer Rate33MB/s
CD-R52X
DVD+R24X
DVD+RW8X
DVD-R24X
DVD-RW8X
BD-R16X
BD-RE2X
BD-R DL8X
Data Source ROM1 Reader Rom for Source Reading
Data Destination Burner7 Writers for Disc to Disc Copy
Language SupportEnglish / Spanish / French / Japanese
Display20 x 2 LCD
Operating TypeStandalone
Load TypeTray
Power SupplyAC: 115-230 V, 50/60 Hz

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I set up the AD07-MMPBD for disc-to-disc copying, and what step do people miss?

Insert the source disc into the single reader drive and blank discs into the seven writer drives, then select the copy mode on the 20 x 2 LCD. The step users often skip is verifying that the source disc is finalised and error-free before starting the 1-to-7 duplication run.

Which parts of the duplicator will need replacement after heavy use?

The seven BD-R writers rated at 16X and the single source reader are the mechanical components that wear first. Optical pickups and tray-loading mechanisms typically require service after extended high-volume cycles, while the flash-memory card slots and USB port see less physical stress.

What speed limit appears first during a long Blu-Ray duplication session?

The 33 MB/s data transfer rate caps sustained throughput. Even though the writers support 16X BD-R, the controller cannot feed data faster than 33 MB/s, so that bus bandwidth becomes the bottleneck during continuous 1-to-7 Blu-Ray copying.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.