Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular beige tower with front LCD panel and four disc trays above card reader slots

Acumen Disc

Acumen Disc CrossOver DVD Duplicator AD04-MMP 1-4 Target 33MB/s 52X CD 24X DVD

SKU CH-KTB4-JGYD6

Standalone duplicator copies between flash memory cards, USB drives and up to four CD or DVD discs at 33 MB/s

  • TypeMultimedia Duplicator
  • Target1 to 4
  • ControllerAcumen Disc
  • Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD
  • Data Transfer Rate33MB/s
  • CD-R52X

Targets 1 to 4

Option Crossover DVD

  • Copies flash media to four discs simultaneously
  • 33 MB/s transfer rate for fast duplication
  • Bi-directional conversion between cards and discs
  • Standalone operation with no computer required
  • Supports USB CF SD Memory Stick and optical media

Standalone multimedia duplicator

The Acumen Disc CrossOver AD04-MMP copies data between flash memory cards, USB drives and optical discs without a host computer. It reads CompactFlash, Secure Digital, Memory Stick and USB media in the upper deck and writes to four DVD writers or a single flash target in the lower slot. The 20 x 2 LCD and multilingual menus let operators run every task from the front panel.

Replaces separate flash-to-disc

One machine now handles bi-directional transfers: flash-to-flash, flash-to-disc, disc-to-flash and disc-to-disc. The jump is worth it when workflows routinely move projects between memory cards and archival CDs or DVDs, eliminating the need to shuttle files through a PC. Multi-session writing and automatic disc spanning keep large card images intact across multiple blanks.

Fits a bench with mains power and blank media

The unit runs on 115-230 V AC at 50/60 Hz and uses tray-loading drives, so it only needs a standard outlet and a supply of CD-R or DVD±R media. Four simultaneous writers free up operator time during batch runs, while the single reader handles source discs or flash cards one at a time. No software installation or host connection is required.

Kohokohdat

  • Copies flash media to four discs simultaneously
  • 33 MB/s transfer rate for fast duplication
  • Bi-directional conversion between cards and discs
  • Standalone operation with no computer required
  • Supports USB CF SD Memory Stick and optical media

Tekniset tiedot

BrandAcumen Disc
ModelCrossOver DVD
Part NumberAD04-MMP
TypeMultimedia Duplicator
Target1 to 4
ControllerAcumen Disc
Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD) / Memory Stick (MS)
Data Transfer Rate33MB/s
CD-R52X
DVD+R24X
DVD+RW8X
DVD-R24X
DVD-RW8X
Data Source ROM1 Reader Rom for Source Reading
Data Destination Burner4 Writers for Disc to Disc Copy
Language SupportEnglish / Spanish / French / Japanese
Display20 x 2 LCD
Operating TypeStandalone
Load TypeTray
Power SupplyAC: 115-230 V, 50/60 Hz

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much clearance does the 20 x 2 LCD and four tray-load writers need?

The unit uses a tray-load mechanism for the source reader and four destination writers; allow enough front space for all five trays to extend fully and room above for the 20 x 2 character LCD to be read comfortably.

What is the correct order for loading source media and blank discs before starting a copy job?

Insert the source disc or flash media first, let the duplicator recognise it, then load up to four blank CDs or DVDs into the writer trays before pressing Start; skipping the recognition step causes failed copies.

Which parts will need replacement after heavy use?

The four DVD writers and the single source reader are mechanical drives; their laser pickups and tray mechanisms wear over time and are the items most likely to require replacement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.