Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black acetal pump top for Laing D5, 80 x 80 x 40 mm, five G1/4 ports, two stands, four LED holes

Alphacool

Alphacool Eisdecke D5 Top Black Acetal G1/4 V.3 pump top

SKU CH-YBY5-6RY4M

Acetal pump top fits Laing D5 and VPP655 units with five G1/4 ports, LED mounts and optional 3.5″ bay installation

  • TypePump

Color Black

  • Eisdecke series membership refreshes a proven D5 top design
  • Three G1/4 inlets and two outlets enable flexible loop routing
  • Integrated holder and 3.5-inch drive-bay option give stable mounting
  • Four 5 mm LED holes support custom lighting builds
  • 80 x 80 x 40 mm Plexi body fits Laing D5, VPP655 and MCP655 pumps

Pump top for Laing D5 / VPP655

The Alphacool Eisdecke D5 Top replaces the stock cover on Laing D5, VPP655, TPP644 or MCP655 pumps. It adds three G1/4 inlets and two G1/4 outlets for flexible loop routing. The black acetal body measures 80 x 80 x 40mm and includes four 5mm LED mounting holes for custom lighting.

Upgrade path and conversion

This top replaces a standard pump cover to improve port options and mounting stability. It also accepts a supplementary accessory element that converts the assembly into a complete reservoir. The jump is worth it when the original pump top lacks enough ports or when a builder wants a reservoir without adding a separate cylinder.

G1/4 interface limits

All five ports use G1/4 threads, so every fitting in the loop must match that standard. The 80 x 80mm footprint fits many layouts and allows optional installation in a 3.5in drive bay, but the fixed port count and spacing restrict how many angled or rotary adapters can sit side by side.

Kohokohdat

  • Eisdecke series membership refreshes a proven D5 top design
  • Three G1/4 inlets and two outlets enable flexible loop routing
  • Integrated holder and 3.5-inch drive-bay option give stable mounting
  • Four 5 mm LED holes support custom lighting builds
  • 80 x 80 x 40 mm Plexi body fits Laing D5, VPP655 and MCP655 pumps

Tekniset tiedot

TypePump

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 80 mm square pump top fit in a standard 3.5 inch drive bay?

The top measures 80 mm by 80 mm and the supplier notes optional installation in a 3.5 inch drive bay, so it should fit that mounting space.

Which way do the three G1/4 inlets and two outlets face when the top is mounted on the Laing D5?

The inlet and outlet ports are positioned on the front or top of the top, and the bottom accepts the pump; use the included mounting material and stands to orient it as needed.

How do I add the optional reservoir later, and what part is required?

A supplementary element is supplied as an accessory that converts the top into a complete reservoir; fit it using the provided hardware when you want the extra capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.