Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Clear acrylic pump top, square 80 by 80 by 40 mm, five G1/4 ports, LED holes, mounting feet

Alphacool

Alphacool Eisdecke D5 Top Plexi G1/4 V.3 13189

SKU CH-S3GK-AST7T

Acrylic pump top fits Laing D5 and VPP655 units, adds five G1/4 ports and optional 3.5-inch bay mounting

  • TypePump

Color Clear

  • Eisdecke series top updates Laing D5 pump integration
  • Three G1/4 inlets and two outlets boost loop routing options
  • Compact 80 x 80 x 40 mm plexi body fits tight builds
  • Integrated stands and 3.5" bay mounting give stable placement
  • Four 5 mm LED holes enable custom lighting effects

Eisdecke D5 top for Laing D5 pumps

The Alphacool Eisdecke D5 Top Plexi G1/4 V.3 replaces the stock cover on a Laing D5 or VPP655 pump. It provides a rigid acrylic housing with integrated G1/4 thread ports so the pump can be plumbed directly into a custom liquid-cooling loop without extra adapters.

Three inlets and two outlets give routing

Five G1/4 threads — three on the face and two on the top — let the builder choose inlet and outlet positions that suit the loop layout. The 80 x 80 x 40 mm footprint fits in standard 3.5 inch drive bays when the optional reservoir accessory is added, while the supplied stands allow free-standing mounting inside the case.

Plexi body with LED mounting points

The clear acrylic top shows coolant flow and includes four 5 mm holes for adding LEDs. Three screw plugs, two stands and all mounting hardware are included so the unit is ready to install once the pump is seated in the base.

Kohokohdat

  • Eisdecke series top updates Laing D5 pump integration
  • Three G1/4 inlets and two outlets boost loop routing options
  • Compact 80 x 80 x 40 mm plexi body fits tight builds
  • Integrated stands and 3.5" bay mounting give stable placement
  • Four 5 mm LED holes enable custom lighting effects

Tekniset tiedot

TypePump

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 80 mm by 80 mm footprint of the Eisdecke D5 Top fit alongside my existing Laing D5 pump in a standard 3.5 inch drive bay?

Yes, the top measures 80 mm long, 80 mm wide and 40 mm high and is designed for optional installation in a 3.5 inch drive bay, so it sits neatly beside the D5 pump you already have.

How can I confirm the pump top is seated correctly after I install it?

Check that all five G1/4 threads are snug, the two included stands hold the unit level, and coolant flows through the three inlets and two outlets without leaks or air bubbles.

What comes in the box and which fittings or accessories must I purchase separately?

The package includes the Eisdecke D5 Top V.3, three G1/4 screw plugs, two stands and mounting hardware; you will need to buy G1/4 fittings, tubing and the Laing D5 or VPP655 pump itself.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.