Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Chrome straight compression fitting G1/4 thread 13/10mm tube size

Alphacool

Alphacool Eiszapfen 13/10mm G1/4 Compression Fitting Chrome 17227

SKU CH-46TE-05ETH

Connects 13mm OD and 10mm ID hard tubing to G1/4 components with a chrome finish and coloured O-rings

  • TypeFittings

Color Chrome

  • High-flow design for efficient liquid cooling loops
  • 13 mm outer and 10 mm inner diameter hard-tube fit
  • G1/4 thread matches 95 % of water-cooling components
  • Durable chrome coating resists chipping and peeling
  • Three coloured O-rings included for customisation and UV effects

Alphacool Eiszapfen 13/10mm Compression Fitting

This Alphacool Eiszapfen compression fitting connects 13mm outer-diameter hard tubing with a 10mm inner diameter to any component using a standard G1/4 thread. The chrome-plated brass body is finished with a durable coating that resists chipping and peeling over time. It is designed for custom liquid-cooling loops where secure, high-flow connections are required.

Check thread compatibility and tube dimensions

Verify that every block, radiator, reservoir or pump you plan to use provides a G1/4 female port, as this fitting mates only with that thread. Confirm your hard tubing measures exactly 13mm outer diameter and 10mm inner diameter; other sizes will not seal correctly. The package includes three coloured O-rings for the tubing side, so decide which colour you prefer before assembly.

Replaces standard or worn compression fittings

Swap this in when an existing fitting shows corrosion, stripped threads or a degraded O-ring that can no longer hold pressure. The angled nut corners press the O-ring more firmly against the tube than many older designs, reducing the risk of leaks during transport or vibration. Builders who want a cohesive chrome aesthetic across all visible fittings will also benefit from the uniform finish.

Kohokohdat

  • High-flow design for efficient liquid cooling loops
  • 13 mm outer and 10 mm inner diameter hard-tube fit
  • G1/4 thread matches 95 % of water-cooling components
  • Durable chrome coating resists chipping and peeling
  • Three coloured O-rings included for customisation and UV effects

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the Alphacool Eiszapfen 17227 include tubing or must I buy 13/10 mm hard tube separately?

The box contains one chrome compression fitting with three coloured O-rings. You must supply 13 mm outer-diameter, 10 mm inner-diameter hard tube yourself.

How do I know the 13/10 mm G1/4 version fits my loop instead of another size?

Choose this fitting when your hard tube measures 13 mm OD and 10 mm ID and your blocks, radiators or reservoirs have G1/4 ports.

Will the 95 % G1/4 compatibility claim hold true with my existing water-blocks and radiators?

The fitting uses a standard G1/4 thread, so it screws into the vast majority of water-cooling components that accept G1/4 ports.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.