Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Chrome-plated brass 45-degree G1/4 adaptor with male and female threads, 21 by 20 by 21 millimetres

Alphacool

Alphacool Eiszapfen 45° G1/4 Adaptor Chrome Brass 17591

SKU CH-YQG4-NDFSX

A 45° G1/4 chrome brass adaptor for tight water-cooling loops, 21 × 20 × 21 mm

  • ColorChrome
  • FeaturesThis 45 angled adapter is equipped with a G1/4" female threa

Color Chrome

  • 45° angle routes tubing in tight spaces
  • G1/4 male-to-female threads connect standard fittings
  • Brass construction resists corrosion in liquid loops
  • Chrome coating bonded to prevent chipping or peeling
  • Includes three coloured O-rings for UV-reactive accents

Alphacool Eiszapfen 45° Adaptor

The Alphacool Eiszapfen 45° G1/4 adaptor connects a male and female G1/4 thread at a fixed forty-five degree angle. It is intended for custom-loop builders who need to route tubing around tight corners inside a chassis. The chrome-plated brass body suits high-flow liquid-cooling circuits where space is restricted.

G1/4 Thread Constraints

Both ports share the industry-standard G1/4 parallel thread, so the fitting only works with matching G1/4 compression or barb connectors. The thread depth is limited to five millimetres, which restricts how far a mating fitting can engage. Builders must verify that their tubing runs allow the fixed forty-five degree offset without forcing the joint.

Brass Build and Daily Use

The solid brass construction resists corrosion and withstands typical loop pressures without deformation. A specialised coating process bonds the chrome finish to the surface, reducing the risk of chipping or peeling during repeated assembly. Three coloured O-rings are included for visual customisation, and they fluoresce under UV lighting. The compact twenty-one millimetre envelope fits alongside densely packed components.

Kohokohdat

  • 45° angle routes tubing in tight spaces
  • G1/4 male-to-female threads connect standard fittings
  • Brass construction resists corrosion in liquid loops
  • Chrome coating bonded to prevent chipping or peeling
  • Includes three coloured O-rings for UV-reactive accents

Tekniset tiedot

BrandAlphacool
Model4250197175913
ColorChrome
FeaturesThis 45 angled adapter is equipped with a G1/4" female thread and a G1/4" male thread. This 45 angled fitting is used in water circuits where there is limited space for tubing and a special solution is required.

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Which version of the Alphacool Eiszapfen 45° G1/4 Adaptor should I choose?

This model is the chrome-plated brass version with a 45° angle, G1/4" male-to-female threads, and includes three coloured O-rings that glow under UV light.

What does the 45° angle do inside my loop?

The 45° bend routes tubing at a shallower turn than a right-angle fitting, reducing kink risk in confined spaces between components.

What does the G1/4 thread standard mean for compatibility?

Both threads are G1/4" BSPP, so the adaptor mates with any standard G1/4" water-cooling fitting, block, radiator or reservoir port.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.