Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 90-degree rotatable G1/4 compression fitting for 13mm hard tube

Alphacool

Alphacool Eiszapfen 13mm 90° rotatable G1/4 compression fitting Black

SKU CH-4M7Q-3A14M

A 13 mm hard-tube compression fitting with a 90° bend and rotatable G1/4 thread for flexible loop routing

  • TypeFittings
  • 90° rotatable design simplifies tube routing in tight spaces
  • G1/4 thread fits 95% of water-cooling components directly
  • 13mm hard-tube compression seal locks acrylic or brass securely
  • Durable coating process resists chipping and preserves colour over time
  • Slanted union-nut corners press O-ring firmly for transport-safe connections

Precision 13 mm 90° fitting

This G1/4 compression fitting joins 13 mm acrylic or brass hard tube at a right angle. The rotatable threaded side lets builders align the connection without stressing the tube run. It is aimed at custom-loop builders who need a clean 90° turn in tight routing spaces.

Rotatable thread eases assembly

The 90° bend removes the need for extra hose length or awkward bends. Because the G1/4 thread rotates freely, the fitting seats cleanly against blocks, radiators or distribution plates. A slanted union nut presses the O-ring firmly against the tube for a secure seal during transport and daily use.

Coating resists chipping under load

A specialised surface treatment bonds the matte black finish to the metal, preventing peeling when the loop is pressurised or thermally cycled. The high-flow internal profile maintains consistent coolant velocity through the bend. Builders needing straight runs or larger tube diameters will need different fittings.

Kohokohdat

  • 90° rotatable design simplifies tube routing in tight spaces
  • G1/4 thread fits 95% of water-cooling components directly
  • 13mm hard-tube compression seal locks acrylic or brass securely
  • Durable coating process resists chipping and preserves colour over time
  • Slanted union-nut corners press O-ring firmly for transport-safe connections

Tekniset tiedot

TypeFittings

Kysymyksiä tästä tuotteesta

How do I install the 13mm 90° rotatable G1/4 compression fitting onto a hard tube?

Slide the union nut and O-ring onto the 13mm acrylic or brass tube, insert the tube fully into the fitting body, then tighten the nut by hand plus a quarter turn with a spanner; the slanted nut corners seat the O-ring securely, and the rotatable G1/4 base lets you align the 90° bend before final tightening.

What maintenance or replacement will the fitting need over time?

The bonded matte-black coating resists chipping, so only the internal O-ring may degrade; inspect it during loop drains and replace with a standard 13mm compression O-ring if it shows flattening or cracking.

What is the first limit I will hit when running this fitting under sustained flow?

The 90° bend and 13mm internal diameter set the flow restriction; it becomes the bottleneck before the G1/4 thread or rotatable joint, so size your pump head pressure accordingly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.