Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.

Gemerkte Artikel Anmelden
Black 90-degree rotatable G1/4 compression fitting for 13mm hard tube

Alphacool

Alphacool Eiszapfen 13mm 90° rotatable G1/4 compression fitting Black

SKU CH-4M7Q-3A14M

A 13 mm hard-tube compression fitting with a 90° bend and rotatable G1/4 thread for flexible loop routing

  • TypeFittings
  • 90° rotatable design simplifies tube routing in tight spaces
  • G1/4 thread fits 95% of water-cooling components directly
  • 13mm hard-tube compression seal locks acrylic or brass securely
  • Durable coating process resists chipping and preserves colour over time
  • Slanted union-nut corners press O-ring firmly for transport-safe connections

Precision 13 mm 90° fitting

This G1/4 compression fitting joins 13 mm acrylic or brass hard tube at a right angle. The rotatable threaded side lets builders align the connection without stressing the tube run. It is aimed at custom-loop builders who need a clean 90° turn in tight routing spaces.

Rotatable thread eases assembly

The 90° bend removes the need for extra hose length or awkward bends. Because the G1/4 thread rotates freely, the fitting seats cleanly against blocks, radiators or distribution plates. A slanted union nut presses the O-ring firmly against the tube for a secure seal during transport and daily use.

Coating resists chipping under load

A specialised surface treatment bonds the matte black finish to the metal, preventing peeling when the loop is pressurised or thermally cycled. The high-flow internal profile maintains consistent coolant velocity through the bend. Builders needing straight runs or larger tube diameters will need different fittings.

Besonderheiten

  • 90° rotatable design simplifies tube routing in tight spaces
  • G1/4 thread fits 95% of water-cooling components directly
  • 13mm hard-tube compression seal locks acrylic or brass securely
  • Durable coating process resists chipping and preserves colour over time
  • Slanted union-nut corners press O-ring firmly for transport-safe connections

Technische Daten

TypeFittings

Fragen zu diesem Artikel

How do I install the 13mm 90° rotatable G1/4 compression fitting onto a hard tube?

Slide the union nut and O-ring onto the 13mm acrylic or brass tube, insert the tube fully into the fitting body, then tighten the nut by hand plus a quarter turn with a spanner; the slanted nut corners seat the O-ring securely, and the rotatable G1/4 base lets you align the 90° bend before final tightening.

What maintenance or replacement will the fitting need over time?

The bonded matte-black coating resists chipping, so only the internal O-ring may degrade; inspect it during loop drains and replace with a standard 13mm compression O-ring if it shows flattening or cracking.

What is the first limit I will hit when running this fitting under sustained flow?

The 90° bend and 13mm internal diameter set the flow restriction; it becomes the bottleneck before the G1/4 thread or rotatable joint, so size your pump head pressure accordingly.

Ebenfalls in dieser Kategorie

Kunden haben diese ebenfalls verglichen

Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.