NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
AMD
Drives three monitors from a single PCIe 3.0 x16 slot with 2 GB memory, two DisplayPort and one DVI output, up to 5.8 MP grayscale resolution, and medical imaging tools such as Conference Clone
The AMD MXRT-5500 is a single-slot PCIe 3.0 x16 graphics card built for diagnostic imaging workstations. It drives up to three monitors from one slot, supporting two high-resolution medical displays and a third auxiliary screen. The GPU delivers DirectX 11.1 and OpenGL 4.2 compatibility for PACS applications.
Conference Clone View mirrors diagnostic images to a large-screen projector with scaling, zoom and pan controls. Dim View automatically lowers brightness on auxiliary displays such as worklists to reduce ambient light. Spot View highlights a circular region of interest by dimming surroundings and boosting contrast. Find Cursor locates the pointer instantly across multiple screens. Single View treats the entire display area as one seamless surface for centred hanging protocols.
The full-height card fits a single PCIe 3.0 x16 slot and uses an onboard fan for cooling. Driver support covers Windows 7 and Windows 8.1 in both 32-bit and 64-bit editions. Common issues arise when the system BIOS does not initialise the x16 link at 3.0 speeds or when DisplayPort cables exceed certified lengths, causing signal drop-out on 5.8MP grayscale outputs.
| Brand | AMD |
|---|---|
| Series | Barco MXRT-5500 |
| Model | Barco MXRT-5500 |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | AMD |
| GPU | MXRT-5500 |
| DirectX | DirectX 11.1 |
| OpenGL | OpenGL 4.2 |
| Multi-Monitor Support | Yes |
| DisplayPort | 2 x DisplayPort |
| DVI | 1 x DVI |
| Max Resolution | Up to 5.8MP grayscale |
| Cooler | With Fan |
| Operating Systems Supported | Windows 7 32/64bit Windows 8.1 32/64bit |
| Form Factor | Plug-in CardFull-height |
| Slot Width | Single Slot |
The card uses a single-slot fan cooler; dust buildup on the heatsink and fan blades is the main maintenance item, so schedule a brief compressed-air clean every few months depending on your environment.
The 2 GB frame buffer and PCIe 3.0 x16 bandwidth set the practical ceiling; sustained high-resolution workloads across three heads will hit memory capacity before thermal limits.
The single-slot fan spins up under load but stays within typical workstation acoustics; the card draws modest power through the PCIe slot, so case airflow handles the heat without extra cables.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?