Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Enclosed metal power supply with built-in fan, low-profile 1.65 inch height

Analog Technologies

Analog Technologies ALRS24V5AT 120W 24V 5A Switching Power Supply

SKU CH-TM60-NZ2HA

Converts 90–264 VAC to 24 VDC at 5 A with 85 % efficiency in a 1.65-inch metal enclosure

  • TypeSwitching Power Supply
  • Delivers 120W continuous power for demanding 3D printers and LED arrays
  • Wide 90–264VAC input handles 110VAC and 220VAC mains worldwide
  • 85% efficiency at 230VAC cuts waste heat and lowers running cost
  • All-metal 42mm low-profile enclosure with built-in fan operates 10–60°C
  • Survives 300VAC surge for 5s and 5G vibration in industrial settings

120W 24V 5A Switching Power Supply

The Analog Technologies ALRS24V5AT converts 90–264VAC input to a regulated 24VDC 5A output. It delivers 120W continuous power in a 42mm low-profile metal enclosure with a built-in long-life fan for full-load cooling. Designed for industrial equipment, 3D printers and LED lighting systems requiring stable DC power.

Capacity and headroom at 120W

The unit supplies 5A at 24V with 85% efficiency at 230VAC and over 83% across the range. It operates from 10°C to 60°C and withstands 300VAC surge input for five seconds. Loads exceeding 120W or currents above 5A will trigger protection or exceed the rated output.

Replaces open-frame or lower-rated supplies

Builders upgrading from unenclosed units gain full EMI shielding, 5G anti-vibration rating and comprehensive protection functions. The jump is worth it when equipment demands a rugged metal housing, wide 90–264VAC input tolerance and reliable operation in harsh industrial environments.

Kohokohdat

  • Delivers 120W continuous power for demanding 3D printers and LED arrays
  • Wide 90–264VAC input handles 110VAC and 220VAC mains worldwide
  • 85% efficiency at 230VAC cuts waste heat and lowers running cost
  • All-metal 42mm low-profile enclosure with built-in fan operates 10–60°C
  • Survives 300VAC surge for 5s and 5G vibration in industrial settings

Tekniset tiedot

TypeSwitching Power Supply

Kysymyksiä tästä tuotteesta

Will the ALRS24V5AT run from the 110VAC or 220VAC mains I already have in my workshop?

The supply accepts a universal input range of 90V to 264VAC, so it operates directly on both 110VAC and 220VAC lines without any selector switch.

How can I verify the ALRS24V5AT is delivering a stable 24VDC at 5A after installation?

Measure the output terminals with a multimeter under load; you should read approximately 24VDC and the unit will maintain regulation up to the full 5A rating.

Does the ALRS24V5AT include mounting hardware or output cables, or must I source them separately?

The product ships as the enclosed power supply unit only; mounting screws and DC output cables are not included and must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.