Antec C8 PC Case — E-ATX Full Tower, Dual-Chamber, 270° Seamless Glass, 360 mm Radiator Support
- E-ATX Full Tower Ca…
- Black
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Antec
Full-tower E-ATX chassis with dual-chamber layout, wooden front panel and curved tempered glass, supporting 360 mm radiators top, bottom and side plus 440 mm graphics cards
Options C8 Curve Wood
The Antec C8 Curve Wood is a full-tower chassis with a dual-chamber layout that separates the GPU and CPU from the power supply and drives. A 4mm curved tempered-glass front panel and a real wood accent give it a distinct look for living-room or workstation setups. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards, including back-connect designs. Toolless panels simplify assembly and maintenance.
Internal storage is limited to one 3.5-inch bay and two 2.5-inch bays, so builders who want more storage will need external solutions. Fan mounts support three 120mm or two 160mm fans at the top and bottom, three 120mm or two 140mm fans on the side, plus a single 120mm or 140mm rear fan. Radiators up to 360mm fit top, bottom and side, while the rear takes a 120mm unit. The CPU cooler clearance is 175mm.
Graphics cards up to 440mm long are supported, covering most RTX models. Power supplies are restricted to 210mm in length, which excludes some longer high-wattage units. The chassis is built from 0.8mm and 1.0mm high-strength steel with a seamless glass edge. No fans are pre-installed, so airflow must be planned from scratch.
| Brand | Antec |
|---|---|
| Model | C8 Curve Wood |
| Type | E-ATX Full Tower Case |
| Color | Black |
| Case Material | Curved Glass/Tempered glass/Seamless glass edge/Dual Chamber/Wood Material |
| Motherboard Compatibility | ATX (Back Connect) / E-ATX / ITX / Micro ATX |
| Side Panel | 4mm Tempered Glass |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 8 |
| Fan Options | Bottom - 2 x 160mm / Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 2 x 140mm / Side - 3 x 120mm / Top - 2 x 160mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | No Fan Installed |
| Radiator Options | Bottom - Up to 360mm / Rear - Up to 120mm / Side - Up to 360mm / Top - Up to 360mm |
| Max GPU Length | 440 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 210 mm |
| Lähetyspaino | 13.54 kg |
| Pakkauksen mitat | 565 × 540 × 389 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The case supports E-ATX boards and graphics cards up to 440 mm long, so your current hardware will fit.
Check that intake fans on the bottom and side pull cool air through the mesh into the GPU chamber while top and rear fans exhaust heat from the CPU chamber.
No fans are pre-installed; you will need to purchase 120 mm, 140 mm or 160 mm fans for the top, bottom, side and rear mounts.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?