Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black full-tower case with curved tempered-glass side and wooden front accent

Antec

Antec C8 Curve Wood Full-Tower E-ATX PC Case

SKU CH-DXTC-YND8W MPN C8 Curve Wood

Full-tower E-ATX chassis with dual-chamber layout, wooden front panel and curved tempered glass, supporting 360 mm radiators top, bottom and side plus 440 mm graphics cards

  • TypeE-ATX Full Tower Case
  • ColorBlack
  • Case MaterialCurved Glass/Tempered glass/Seamless glass edge/Dual Chamber
  • Motherboard CompatibilityATX (Back Connect) / E-ATX / ITX / Micro ATX
  • Side Panel4mm Tempered Glass
  • Dust FiltersBottom

Options C8 Curve Wood

  • Real wood front panel adds a natural aesthetic to the build
  • Single 4mm curved tempered glass side panel provides an unobstructed interior view
  • Dual-chamber layout separates the GPU and CPU from the PSU and drives for independent cooling
  • Supports 360mm radiators on the top, bottom and side for extensive liquid cooling options
  • Accommodates graphics cards up to 440mm long and CPU coolers up to 175mm tall

Dual-Chamber E-ATX Case for Enthusiast Builds

The Antec C8 Curve Wood is a full-tower chassis with a dual-chamber layout that separates the GPU and CPU from the power supply and drives. A 4mm curved tempered-glass front panel and a real wood accent give it a distinct look for living-room or workstation setups. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards, including back-connect designs. Toolless panels simplify assembly and maintenance.

Drive Capacity and Cooling Headroom

Internal storage is limited to one 3.5-inch bay and two 2.5-inch bays, so builders who want more storage will need external solutions. Fan mounts support three 120mm or two 160mm fans at the top and bottom, three 120mm or two 140mm fans on the side, plus a single 120mm or 140mm rear fan. Radiators up to 360mm fit top, bottom and side, while the rear takes a 120mm unit. The CPU cooler clearance is 175mm.

GPU Length and PSU Limits

Graphics cards up to 440mm long are supported, covering most RTX models. Power supplies are restricted to 210mm in length, which excludes some longer high-wattage units. The chassis is built from 0.8mm and 1.0mm high-strength steel with a seamless glass edge. No fans are pre-installed, so airflow must be planned from scratch.

Přednosti

  • Real wood front panel adds a natural aesthetic to the build
  • Single 4mm curved tempered glass side panel provides an unobstructed interior view
  • Dual-chamber layout separates the GPU and CPU from the PSU and drives for independent cooling
  • Supports 360mm radiators on the top, bottom and side for extensive liquid cooling options
  • Accommodates graphics cards up to 440mm long and CPU coolers up to 175mm tall

Specifikace

BrandAntec
ModelC8 Curve Wood
TypeE-ATX Full Tower Case
ColorBlack
Case MaterialCurved Glass/Tempered glass/Seamless glass edge/Dual Chamber/Wood Material
Motherboard CompatibilityATX (Back Connect) / E-ATX / ITX / Micro ATX
Side Panel4mm Tempered Glass
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots8
Fan OptionsBottom - 2 x 160mm / Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 2 x 140mm / Side - 3 x 120mm / Top - 2 x 160mm / Top - 3 x 120mm / Top - 3 x 140mm
Pre-installed FansNo Fan Installed
Radiator OptionsBottom - Up to 360mm / Rear - Up to 120mm / Side - Up to 360mm / Top - Up to 360mm
Max GPU Length440 mm
Max CPU Cooler Height175 mm
Max PSU Length210 mm
Přepravní hmotnost13.54 kg
Rozměry balení565 × 540 × 389 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will my existing E-ATX motherboard and 440 mm GPU fit in the C8 Curve Wood?

The case supports E-ATX boards and graphics cards up to 440 mm long, so your current hardware will fit.

How can I verify the dual-chamber airflow is working after I build in the C8 Curve Wood?

Check that intake fans on the bottom and side pull cool air through the mesh into the GPU chamber while top and rear fans exhaust heat from the CPU chamber.

Does the C8 Curve Wood ship with any fans or must I buy them separately?

No fans are pre-installed; you will need to purchase 120 mm, 140 mm or 160 mm fans for the top, bottom, side and rear mounts.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.