NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Antminer
Mines Dogecoin using the Scrypt algorithm at 15 GH/s while drawing 3150 W with a built-in power supply
The Antminer L9 delivers a typical hashrate of 15 GH/s for the Scrypt algorithm, making it suitable for mining Dogecoin and other compatible currencies. It operates on 220-277V AC input with a built-in power supply and draws up to 3150 W at the wall. Typical power efficiency is 210 J/GH with actual values fluctuating by ±5%. The unit weighs 14.2 kg and measures 400×195×290 mm.
Replacing older Scrypt hardware with the L9 raises hashrate to 15 GH/s while keeping power efficiency at 210 J/GH, reducing energy cost per coin when electricity rates are stable. The jump is worth it when the higher output offsets the 3150 W draw and the 75 dBA noise level fits the operating environment. Hashrate may vary by ±3% and power by ±5% in practice.
Connect the RJ45 Ethernet 10/100M port to the network and supply 220-277V AC at up to 20 A single-phase; wrong input voltage may damage the server. Ensure ambient temperature stays within -20°C to 45°C and humidity 10-90% RH non-condensing at altitudes up to 2000 m. Fans run at max RPM under peak load, so plan airflow and noise isolation accordingly.
| Brand | Antminer |
|---|---|
| Series | Antminer L9 |
| Model | Antminer L9 15GH |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin (DOGE) |
| Mining Hardware | ASIC |
| Hashrate | 15 GH/s |
| Network Connection | RJ45 Ethernet 10/100M |
| Noise level | 75 dBA |
| Power Supply | Built-in Power Supply |
| Power Consumption | 3150 Watt |
| Power Efficiency | 210 J/GH |
| Operation Temperature | -20~45 °C |
| Storage Temperature | -40~70 °C |
| Operation Humidity | 10~90% RH |
| Dimension | 400*195*290 mm |
| Weight | 14.2 KG |
| Package Content | 570*316*430 mm |
Allow at least 100 mm free space at the front fan wall and 150 mm at the rear exhaust so the 75 dBA airflow can move through the -20 to 45 °C operating envelope without recirculation.
Verify the circuit breaker is rated for 20 A, connect the IEC cord to the built-in PSU before powering on, then link the RJ45 Ethernet 10/100M port; skipping the breaker check is the step most often missed.
Plan a visual check every 180 days; if bearing noise rises above the baseline 75 dBA or RPM drops below the max-condition spec, swap both fans to keep the 210 J/GH efficiency target.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?