NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Antminer
Mines Dogecoin using the Scrypt algorithm at 15 GH/s while drawing 3150 W with a built-in power supply
The Antminer L9 delivers a typical hashrate of 15 GH/s for the Scrypt algorithm, making it suitable for mining Dogecoin and other compatible currencies. It operates on 220-277V AC input with a built-in power supply and draws up to 3150 W at the wall. Typical power efficiency is 210 J/GH with actual values fluctuating by ±5%. The unit weighs 14.2 kg and measures 400×195×290 mm.
Replacing older Scrypt hardware with the L9 raises hashrate to 15 GH/s while keeping power efficiency at 210 J/GH, reducing energy cost per coin when electricity rates are stable. The jump is worth it when the higher output offsets the 3150 W draw and the 75 dBA noise level fits the operating environment. Hashrate may vary by ±3% and power by ±5% in practice.
Connect the RJ45 Ethernet 10/100M port to the network and supply 220-277V AC at up to 20 A single-phase; wrong input voltage may damage the server. Ensure ambient temperature stays within -20°C to 45°C and humidity 10-90% RH non-condensing at altitudes up to 2000 m. Fans run at max RPM under peak load, so plan airflow and noise isolation accordingly.
| Brand | Antminer |
|---|---|
| Series | Antminer L9 |
| Model | Antminer L9 15GH |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin (DOGE) |
| Mining Hardware | ASIC |
| Hashrate | 15 GH/s |
| Network Connection | RJ45 Ethernet 10/100M |
| Noise level | 75 dBA |
| Power Supply | Built-in Power Supply |
| Power Consumption | 3150 Watt |
| Power Efficiency | 210 J/GH |
| Operation Temperature | -20~45 °C |
| Storage Temperature | -40~70 °C |
| Operation Humidity | 10~90% RH |
| Dimension | 400*195*290 mm |
| Weight | 14.2 KG |
| Package Content | 570*316*430 mm |
Allow at least 100 mm free space at the front fan wall and 150 mm at the rear exhaust so the 75 dBA airflow can move through the -20 to 45 °C operating envelope without recirculation.
Verify the circuit breaker is rated for 20 A, connect the IEC cord to the built-in PSU before powering on, then link the RJ45 Ethernet 10/100M port; skipping the breaker check is the step most often missed.
Plan a visual check every 180 days; if bearing noise rises above the baseline 75 dBA or RPM drops below the max-condition spec, swap both fans to keep the 210 J/GH efficiency target.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?