Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit with front grille and rear power connectors

Antminer

Antminer S19 82Th/s 2829W SHA-256 mining hardware

SKU CH-3F47-DK813

SHA-256 ASIC miner delivering 82 Th/s at 2829 W with Ethernet connectivity and 220 V input requirement

  • 82 Th/s ±3 % hashrate for high SHA-256 mining throughput
  • 2829 W ±5 % wall power at 25 °C for efficient energy use
  • 200–240 V AC input range matches standard 220 V supply
  • Ethernet connection enables remote monitoring of mining progress
  • High-speed fans improve heat dissipation for stable continuous operation

Antminer S19 82Th/s SHA-256 Miner

The Antminer S19 is an ASIC mining system built for the SHA-256 algorithm. It delivers a nominal hashrate of 82Th/s with a tolerance of ±3%. The unit draws approximately 2829W at the wall with a ±5% variance. It ships with an integrated power supply and connects via Ethernet.

Suited for SHA-256 mining at 200–240V input

This hardware targets operators mining Bitcoin or other SHA-256 coins who can provide a 200V to 240V AC supply. The design uses high-speed fans for heat dissipation and allows remote monitoring. Buyers limited to lower-voltage mains or those needing a different algorithm should look at other equipment.

82Th/s hashrate at 2829W power draw

The efficiency ratio defined by the 82Th/s hashrate and 2829W consumption is the decisive specification for profitability calculations. Confirm your site can meet the 220V nominal requirement before deployment.

Kohokohdat

  • 82 Th/s ±3 % hashrate for high SHA-256 mining throughput
  • 2829 W ±5 % wall power at 25 °C for efficient energy use
  • 200–240 V AC input range matches standard 220 V supply
  • Ethernet connection enables remote monitoring of mining progress
  • High-speed fans improve heat dissipation for stable continuous operation

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What input voltage does the Antminer S19 82Th/s require for safe operation?

The Antminer S19 82Th/s requires an AC input voltage between 200 V and 240 V. Supplying 220 V is typical; voltages outside this range can damage the unit.

How do I connect the Antminer S19 82Th/s to the network for initial setup?

Connect the built-in Ethernet port to your router or switch using a standard network cable. The miner obtains an IP address via DHCP, then you access its web interface from a browser on the same network.

What routine maintenance does the Antminer S19 82Th/s need to sustain its 82 Th/s hashrate?

Clean the high-speed fans and heatsink fins regularly to prevent dust build-up that reduces cooling efficiency. Monitor the 2829 W power draw; a sustained rise often signals degrading thermal paste or failing fans.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.