Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular metal mining unit with front grille and rear power connectors

Antminer

Antminer S19 82Th/s 2829W SHA-256 mining hardware

SKU CH-3F47-DK813

SHA-256 ASIC miner delivering 82 Th/s at 2829 W with Ethernet connectivity and 220 V input requirement

  • 82 Th/s ±3 % hashrate for high SHA-256 mining throughput
  • 2829 W ±5 % wall power at 25 °C for efficient energy use
  • 200–240 V AC input range matches standard 220 V supply
  • Ethernet connection enables remote monitoring of mining progress
  • High-speed fans improve heat dissipation for stable continuous operation

Antminer S19 82Th/s SHA-256 Miner

The Antminer S19 is an ASIC mining system built for the SHA-256 algorithm. It delivers a nominal hashrate of 82Th/s with a tolerance of ±3%. The unit draws approximately 2829W at the wall with a ±5% variance. It ships with an integrated power supply and connects via Ethernet.

Suited for SHA-256 mining at 200–240V input

This hardware targets operators mining Bitcoin or other SHA-256 coins who can provide a 200V to 240V AC supply. The design uses high-speed fans for heat dissipation and allows remote monitoring. Buyers limited to lower-voltage mains or those needing a different algorithm should look at other equipment.

82Th/s hashrate at 2829W power draw

The efficiency ratio defined by the 82Th/s hashrate and 2829W consumption is the decisive specification for profitability calculations. Confirm your site can meet the 220V nominal requirement before deployment.

Poudarki

  • 82 Th/s ±3 % hashrate for high SHA-256 mining throughput
  • 2829 W ±5 % wall power at 25 °C for efficient energy use
  • 200–240 V AC input range matches standard 220 V supply
  • Ethernet connection enables remote monitoring of mining progress
  • High-speed fans improve heat dissipation for stable continuous operation

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What input voltage does the Antminer S19 82Th/s require for safe operation?

The Antminer S19 82Th/s requires an AC input voltage between 200 V and 240 V. Supplying 220 V is typical; voltages outside this range can damage the unit.

How do I connect the Antminer S19 82Th/s to the network for initial setup?

Connect the built-in Ethernet port to your router or switch using a standard network cable. The miner obtains an IP address via DHCP, then you access its web interface from a browser on the same network.

What routine maintenance does the Antminer S19 82Th/s need to sustain its 82 Th/s hashrate?

Clean the high-speed fans and heatsink fins regularly to prevent dust build-up that reduces cooling efficiency. Monitor the 2829 W power draw; a sustained rise often signals degrading thermal paste or failing fans.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.