NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
APEVIA CORP.
A 500 W ATX supply with a 120 mm fan, single 12 V rail at 36 A, dual SATA connectors and 115/230 V input
The APEVIA ATX-VN500W is a 500 W Intel ATX 12V unit built for mainstream desktop systems. It ships with a 120 mm black fan in a sandblasted metal case and includes a 20+4 pin main connector plus a 4-pin CPU connector. Two SATA power connectors and four peripheral connectors handle drives and accessories. The 140 mm depth fits most standard chassis.
This unit suits everyday workstations and entry-level gaming rigs that draw moderate power from a single +12 V rail rated at 36 A. Builders who need more SATA power connectors for multiple drives or who require modular cabling for a compact case should look elsewhere.
The +12 V rail delivers up to 36 A, which sets the practical limit for CPU and graphics card combined draw. Check your components' peak current against this figure before purchasing.
| Brand | APEVIA |
|---|---|
| Model | ATX-VN500W |
| Type | Intel ATX 12V |
| Maximum Power | 500 W |
| Fans | Forced air ventilation by 1 x 120mm black fan |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| SATA Power Connector | 2 |
| Max PSU Length | 140 mm |
| Input Voltage | 115 / 230 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8A - 4A |
| Output | +3.3V@16A, +5V@16A, +12V@36A, [email protected] , [email protected] |
| Connectors | 1 x 20/24pin Main Power 1 x 4pin P4 2 x SATA 4 x Peripheral 1 x Floppy |
| Features | Black sandblasting coated case Metal Material Additional power rocker switch 115/230 Volt selector switch 500W Power with 12cm black fan High stability with 5% tolerance of 5V, 3.3V & 12V output High quality components and housing Low noise auto-thermally control 120mm fan Power cord Retail box 20 + 4 pin main connector can be used for 20 pin or 24 pin 1 x ATX12V 4pin connector 2 x SATA connector 4 x 4 pin peripheral connector 1 x floppy connector |
| Dimensions | 3.40" x 5.90" x 5.50" |
| Weight | 3.00 lbs. |
| Lähetyspaino | 1.18 kg |
| Pakkauksen mitat | 246 × 185 × 99 mm |
The unit measures 140 mm deep, 5.90 inches wide and 3.40 inches high, so allow at least that length plus cable bend radius behind the motherboard tray.
Four standard ATX case screws hold the sandblasted metal chassis; flip the red voltage selector to match your mains supply before connecting the 20+4 pin main and 4 pin P4 cables.
Vacuum the beehive vent holes and fan blades every 6–12 months; if bearing noise appears or RPM drops, swap the 120 mm black fan for an identical 12 V unit.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?