Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small green circuit board with two rows of gold pin headers along its long edges, a silver metal Wi-Fi module near one corner

Arduino

Arduino Nano 33 IoT Development Board with Headers

SKU CH-4TSG-XTSAV

A compact 3.3 V development board with a 48 MHz Arm Cortex-M0+, 256 KB flash, 32 KB RAM, secure Wi-Fi and Bluetooth, a 6-axis IMU and 14 I/O pins

  • Compact 45 x 18 mm form factor fits tight spaces
  • Arm Cortex-M0+ at 48 MHz with 256 KB flash and 32 KB RAM
  • Secure Wi-Fi and Bluetooth via u-blox NINA-W10 and ECC608A crypto chip
  • On-board 6-axis IMU enables motion and vibration sensing
  • Efficient DC-DC supply accepts up to 21 V input for flexible powering

IoT Entry Board

The Arduino Nano 33 IoT is a compact development board that adds secure Wi-Fi and Bluetooth connectivity to the familiar Nano form factor. It targets makers and engineers who need a straightforward path to cloud-connected sensor projects without designing custom RF hardware. The 3.3 V logic level and pre-certified radio module simplify compliance for commercial prototypes.

Headers And Crypto Ready

The board ships with pin headers already soldered, so it can be plugged directly into a breadboard or custom PCB for immediate testing. An on-board ECC608A crypto chip handles key storage and TLS handshakes, removing the need for external security components in IoT designs. A six-axis IMU adds motion sensing for orientation or vibration detection without extra wiring.

Voltage And Spectrum Limits

The on-board DC-DC converter accepts input up to 21 V, yet every I/O pin operates at 3.3 V and is not 5 V tolerant, so level shifting is mandatory when interfacing with classic Arduino shields. Wireless communication is confined to the 2.4 GHz band, limiting range in congested environments. Flash memory is 256 KB and SRAM is 32 KB, constraining the complexity of local application code.

Kohokohdat

  • Compact 45 x 18 mm form factor fits tight spaces
  • Arm Cortex-M0+ at 48 MHz with 256 KB flash and 32 KB RAM
  • Secure Wi-Fi and Bluetooth via u-blox NINA-W10 and ECC608A crypto chip
  • On-board 6-axis IMU enables motion and vibration sensing
  • Efficient DC-DC supply accepts up to 21 V input for flexible powering

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Does the ECC608A crypto chip need any maintenance or replacement over time?

The ECC608A crypto chip is a fixed component soldered to the board and requires no maintenance or scheduled replacement during normal operation.

What is the first limit reached when running the SAMD21 processor continuously at 48MHz?

Thermal limits of the on-board DC-DC supply are reached first when powering external devices from the 3.3V rail at high current while the processor runs at 48MHz.

How much heat does the board produce when powered at 21V and running all day?

The DC-DC converter maintains high efficiency up to 21V input, keeping heat low even when supplying significant current to external peripherals continuously.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.