BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Athena Power
A 2U rackmount chassis holding Micro-ATX or Mini-ITX boards, three low-profile slots, one 5.25" bay, two 80mm fans and a washable air filter
The Athena Power RM-2U200H is a 2U rackmount server chassis built for standard 19-inch racks. It accepts MicroATX and Mini-ITX motherboards in a black aluminium front panel with a 1.2mm steel body. Two 80mm front intake fans and a washable air filter handle airflow. Three low-profile expansion slots and one external 5.25-inch bay provide essential connectivity for focused deployments.
This chassis replaces tower servers that waste rack depth or 1U units that restrict expansion. The jump is worthwhile when you need three low-profile cards plus a 5.25-inch device in a 13.84-inch deep enclosure. It is not for builders who require full-height cards, multiple 3.5-inch drive arrays, hot-swap backplanes or redundant power supplies.
Dual 80mm fans pull cool air through the front filter directly across the motherboard and expansion area. The washable filter sits in front of both fans, so cleaning restores original airflow without opening the chassis. Steel construction and front-to-rear layout maintain consistent thermals during continuous operation rather than short bursts.
| Brand | Athena Power |
|---|---|
| Model | RM-2U200H |
| Chassis Type | Rackmount |
| Form Factor | 2U |
| Color | Black |
| Case Material | Aluminum / Steel |
| Motherboard Compatibility | MicroATX (9.6x9.6) Mini-ITX (6.7x6.7) |
| Power Supply | Micro PS3 Single Power Supply |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | When open bay not in use; 3.5" x 1 or 2.5" x 2 |
| Expansion Slots | Low Profile x 3 |
| Front Ports | 2 x USB 2.0 |
| 80mm Fans | 2 |
| Features | 19" Rackmount standard Air Filter: Washable Switch: Power On/Off, Reset Indicators: LED for Power and HDD Material: Aluminum Front Panel and 1.2mm Steel (Body) |
| Dimensions | 19" x 3.5" x 13.84" |
| Lähetyspaino | 6.90 kg |
| Pakkauksen mitat | 569 × 508 × 244 mm |
The unit fits a standard 19 inch rack and is 13.84 inches deep.
MicroATX 9.6 by 9.6 inch and Mini-ITX 6.7 by 6.7 inch boards are supported with a Micro PS3 supply; the low-profile bracket holes are narrower than full-height slots.
Remove and wash the front filter whenever dust builds up on its mesh, typically every few months in normal use.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?