BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Athena Power
A 2U rackmount chassis holding Micro-ATX or Mini-ITX boards, three low-profile slots, one 5.25" bay, two 80mm fans and a washable air filter
The Athena Power RM-2U200H is a 2U rackmount server chassis built for standard 19-inch racks. It accepts MicroATX and Mini-ITX motherboards in a black aluminium front panel with a 1.2mm steel body. Two 80mm front intake fans and a washable air filter handle airflow. Three low-profile expansion slots and one external 5.25-inch bay provide essential connectivity for focused deployments.
This chassis replaces tower servers that waste rack depth or 1U units that restrict expansion. The jump is worthwhile when you need three low-profile cards plus a 5.25-inch device in a 13.84-inch deep enclosure. It is not for builders who require full-height cards, multiple 3.5-inch drive arrays, hot-swap backplanes or redundant power supplies.
Dual 80mm fans pull cool air through the front filter directly across the motherboard and expansion area. The washable filter sits in front of both fans, so cleaning restores original airflow without opening the chassis. Steel construction and front-to-rear layout maintain consistent thermals during continuous operation rather than short bursts.
| Brand | Athena Power |
|---|---|
| Model | RM-2U200H |
| Chassis Type | Rackmount |
| Form Factor | 2U |
| Color | Black |
| Case Material | Aluminum / Steel |
| Motherboard Compatibility | MicroATX (9.6x9.6) Mini-ITX (6.7x6.7) |
| Power Supply | Micro PS3 Single Power Supply |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | When open bay not in use; 3.5" x 1 or 2.5" x 2 |
| Expansion Slots | Low Profile x 3 |
| Front Ports | 2 x USB 2.0 |
| 80mm Fans | 2 |
| Features | 19" Rackmount standard Air Filter: Washable Switch: Power On/Off, Reset Indicators: LED for Power and HDD Material: Aluminum Front Panel and 1.2mm Steel (Body) |
| Dimensions | 19" x 3.5" x 13.84" |
| وزن الشحنة | 6.90 kg |
| أبعاد الطرد | 569 × 508 × 244 mm |
The unit fits a standard 19 inch rack and is 13.84 inches deep.
MicroATX 9.6 by 9.6 inch and Mini-ITX 6.7 by 6.7 inch boards are supported with a Micro PS3 supply; the low-profile bracket holes are narrower than full-height slots.
Remove and wash the front filter whenever dust builds up on its mesh, typically every few months in normal use.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟