Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Barco MXRT-5500 single-slot graphics card with 2 GB GDDR5 memory

Barco

Barco MXRT-5500 2 GB GDDR5 workstation graphics card

SKU CH-5TNG-9Y4D6 MPN MXRT-5500

A single-slot workstation card with 2 GB GDDR5 drives three monitors from one PCIe 3.0 x16 slot

  • InterfacePCI Express 3.0 x16
  • Chipset ManufacturerAMD
  • Memory Size2GB
  • Memory TypeGDDR5
  • OpenGLOpenGL
  • DisplayPortYes
  • Drives three monitors from one PCIe slot
  • 2 GB GDDR5 memory for diagnostic imaging
  • PCI Express 3.0 x16 single-slot design
  • AMD FirePro chipset for PACS workstations
  • DisplayPort and dual-link DVI outputs included

Purpose-built PACS graphics

The Barco MXRT-5500 is a new workstation graphics card designed for medical imaging workstations. It targets radiologists and PACS administrators who need to drive two diagnostic displays plus a third monitor for patient lists or 3D viewing from a single expansion slot.

PCI Express 3.0 x16 bandwidth ceiling

The card connects through a PCI Express 3.0 x16 interface, which sets the maximum data rate between the GPU and the rest of the system. Workloads that move very large image datasets across the bus will be limited by this generation-three link rather than by the card’s own processing capability.

2 GB GDDR5 frame buffer capacity

Only 2 GB of GDDR5 memory is available for textures, frame buffers and intermediate compute results. Studies that exceed this capacity will force the driver to swap to system memory, so buyers planning high-resolution multi-modality viewports should verify their typical dataset footprint before choosing this model.

Kohokohdat

  • Drives three monitors from one PCIe slot
  • 2 GB GDDR5 memory for diagnostic imaging
  • PCI Express 3.0 x16 single-slot design
  • AMD FirePro chipset for PACS workstations
  • DisplayPort and dual-link DVI outputs included

Tekniset tiedot

BrandBarco
InterfacePCI Express 3.0 x16
Chipset ManufacturerAMD
Memory Size2GB
Memory TypeGDDR5
OpenGLOpenGL
DisplayPortYes
DVIYes
Dual-Link DVI SupportedYes
Form FactorPlug-in Card

Kysymyksiä tästä tuotteesta

Which memory size and type should I pick for diagnostic imaging workloads?

The card comes with 2 GB of GDDR5 memory, sized for dual diagnostic displays plus a third monitor in PACS workstations.

What does the 5500 model number mean for real-world multi-monitor use?

The MXRT-5500 drives three monitors from a single PCIe slot, supporting two diagnostic displays and an auxiliary screen for worklists or 3D viewing.

How does the PCI Express 3.0 x16 interface limit data throughput in practice?

The PCI Express 3.0 x16 link provides the bandwidth needed for three simultaneous display outputs and Barco tools such as CloneView, DimView and SpotView.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.