BattleBorn
BattleBorn BB-SCSCDXMM-5M 5m SC-SC Duplex 62.5/125 Multimode Fibre Optic Cable
A 5 metre duplex multimode fibre patch cable with SC connectors for 62.5/125 µm links up to 10 Gbps
- TypeHome Electronics Accessories
- Length5 ft.
- Connector Number1
- 5 m length connects equipment across the rack
- SC‑SC duplex connectors link transceivers directly
- 5/125 µm multimode fibre supports 10 Gbps Ethernet
- 35 dB insertion loss meets industry standards
- Orange PVC jacket is RoHS compliant
5 m SC‑SC Duplex Multimode Patch Cable
This 5 metre duplex cable uses 62.5/125 µm multimode fibre with SC connectors on both ends. It is built for LAN links, data‑centre patching and enterprise network runs where short‑reach multimode connections are required.
Sustained 10 Gbps Ethernet Performance
The cable supports 10 Gbps data rates and is suited to 10G, 40G and 100G Ethernet links using SR or LRM transceivers. Insertion loss is specified at 0.35 dB, meeting or exceeding industry attenuation standards so signal integrity holds over the full 5 metre length during continuous traffic.
Low‑Loss PVC Jacket, No Electrical Conductivity
The orange PVC jacket is RoHS compliant and carries no electricity, eliminating ground‑loop risk and allowing dense conduit fill. Multimode glass construction keeps power draw at zero while maintaining stable transmission without active cooling or noise.
Kohokohdat
- 5 m length connects equipment across the rack
- SC‑SC duplex connectors link transceivers directly
- 5/125 µm multimode fibre supports 10 Gbps Ethernet
- 35 dB insertion loss meets industry standards
- Orange PVC jacket is RoHS compliant
Tekniset tiedot
| Brand | BattleBorn |
|---|---|
| Model | BB-SCSCDXMM-5M |
| Type | Home Electronics Accessories |
| Length | 5 ft. |
| Connector Number | 1 |
Kysymyksiä tästä tuotteesta
How much heat does the 5 m SC-SC duplex cable generate when carrying 10 Gbps traffic all day?
The cable is passive fibre; it carries light instead of electricity and produces no measurable heat during continuous 10 Gbps operation.
Which transceivers must I already own to use this 62.5/125 µm multimode patch cord?
You need SFP+ or similar modules with SC connectors that support 62.5/125 µm multimode fibre for 10G SR, 10G LRM or 40G/100G Ethernet links.
Will the 0.35 dB insertion loss work with legacy 1 Gbps equipment I plan to keep?
Yes, the low 0.35 dB loss is well within the budget for older 1 Gbps multimode links, so the cable will not degrade those connections.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051402BTC
Varastossa