我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

BattleBorn

BattleBorn BB-SCSCDXMM-5M 5m SC-SC Duplex 62.5/125 Multimode Fibre Optic Cable

SKU CH-RPBA-2WY4K

A 5 metre duplex multimode fibre patch cable with SC connectors for 62.5/125 µm links up to 10 Gbps

  • TypeHome Electronics Accessories
  • Length5 ft.
  • Connector Number1
  • 5 m length connects equipment across the rack
  • SC‑SC duplex connectors link transceivers directly
  • 5/125 µm multimode fibre supports 10 Gbps Ethernet
  • 35 dB insertion loss meets industry standards
  • Orange PVC jacket is RoHS compliant

5 m SC‑SC Duplex Multimode Patch Cable

This 5 metre duplex cable uses 62.5/125 µm multimode fibre with SC connectors on both ends. It is built for LAN links, data‑centre patching and enterprise network runs where short‑reach multimode connections are required.

Sustained 10 Gbps Ethernet Performance

The cable supports 10 Gbps data rates and is suited to 10G, 40G and 100G Ethernet links using SR or LRM transceivers. Insertion loss is specified at 0.35 dB, meeting or exceeding industry attenuation standards so signal integrity holds over the full 5 metre length during continuous traffic.

Low‑Loss PVC Jacket, No Electrical Conductivity

The orange PVC jacket is RoHS compliant and carries no electricity, eliminating ground‑loop risk and allowing dense conduit fill. Multimode glass construction keeps power draw at zero while maintaining stable transmission without active cooling or noise.

商品特色

  • 5 m length connects equipment across the rack
  • SC‑SC duplex connectors link transceivers directly
  • 5/125 µm multimode fibre supports 10 Gbps Ethernet
  • 35 dB insertion loss meets industry standards
  • Orange PVC jacket is RoHS compliant

商品規格

BrandBattleBorn
ModelBB-SCSCDXMM-5M
TypeHome Electronics Accessories
Length5 ft.
Connector Number1

商品問答

How much heat does the 5 m SC-SC duplex cable generate when carrying 10 Gbps traffic all day?

The cable is passive fibre; it carries light instead of electricity and produces no measurable heat during continuous 10 Gbps operation.

Which transceivers must I already own to use this 62.5/125 µm multimode patch cord?

You need SFP+ or similar modules with SC connectors that support 62.5/125 µm multimode fibre for 10G SR, 10G LRM or 40G/100G Ethernet links.

Will the 0.35 dB insertion loss work with legacy 1 Gbps equipment I plan to keep?

Yes, the low 0.35 dB loss is well within the budget for older 1 Gbps multimode links, so the cable will not degrade those connections.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。