BGears b-PWM 80 Red 80mm Case Fan 500-4000 RPM 78 CFM 37 dBA 2 Ball Bearing Red
- 1 Fan
- No Controller
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
BGears
An 80 mm PWM case fan with 15 translucent blue blades, dual ball bearings and a 500 to 4000 RPM range delivering 78 CFM at 37 dBA
The BGears b-PWM 80 Blue is an 80mm case fan with a 25mm thickness and dual ball bearing. It operates between 500 and 4000 RPM with a tolerance of 10 percent. The fan delivers 78 CFM of airflow at a noise level of 37 dBA. A 4 pin PWM connector and a 3 to 4 pin Molex adapter are included.
This fan suits builds that require an 80mm mounting point and want a wide speed range controlled by PWM. It also fits systems that only offer a 3 pin header because the package includes a 3 to 4 pin adapter. Builders whose cases only accept larger fan sizes cannot use this unit.
The single specification that decides fit is the airflow to noise ratio of 78 CFM at 37 dBA. If the thermal design needs more airflow than 78 CFM at that acoustic level, a different fan is required. If the target noise floor is lower than 37 dBA at full speed, this model will exceed it.
| Brand | Bgears |
|---|---|
| Model | b-PWM 80 Blue |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | 2 Ball |
| RPM | 500 to 4000 RPM +/- 10% |
| Air Flow | 78 CFM |
| Noise Level | 37 dBA |
| Power Connector | 3 / 4 Pin |
| Color | Blue |
| Features | Extreme airflow range for ultimate cooling and control 2 Ball Bearing designed for high speed high performance Better cooling and silent system performance thru PWM fan speed control 15 aerodynamic design fan blades for better airflow and stability 15 translucent blades This fan can also be directly connected to a standard mini 3 pin connector on the motherboard or fan controllers Mini 4 pin connector, 3 to 4 pin Molex adapter and 4 screws included |
| Dimensions | 80.00 x 80.00 x 25.00 mm |
| Lähetyspaino | 0.12 kg |
| Pakkauksen mitat | 204 × 142 × 38 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Use your motherboard BIOS or fan-control software to monitor the reported RPM; it should read between 500 and 4000 RPM with a tolerance of 10% and the noise should stay near 37 dBA at typical speeds.
The package includes the 80mm fan, a mini 4-pin PWM connector, a 3-to-4-pin Molex adapter and four mounting screws; no separate controller is required because PWM speed control is handled by the motherboard header.
This single model — b-PWM 80 Blue — matches those specs: 80mm frame, 15 translucent blue blades, 2-ball bearing, 78 CFM airflow and 37 dBA noise.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?