BGears b-PWM 80 Red 80mm Case Fan 500-4000 RPM 78 CFM 37 dBA 2 Ball Bearing Red
- 1 Fan
- No Controller
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
BGears
An 80 mm PWM case fan with 15 translucent blue blades, dual ball bearings and a 500 to 4000 RPM range delivering 78 CFM at 37 dBA
The BGears b-PWM 80 Blue is an 80mm case fan with a 25mm thickness and dual ball bearing. It operates between 500 and 4000 RPM with a tolerance of 10 percent. The fan delivers 78 CFM of airflow at a noise level of 37 dBA. A 4 pin PWM connector and a 3 to 4 pin Molex adapter are included.
This fan suits builds that require an 80mm mounting point and want a wide speed range controlled by PWM. It also fits systems that only offer a 3 pin header because the package includes a 3 to 4 pin adapter. Builders whose cases only accept larger fan sizes cannot use this unit.
The single specification that decides fit is the airflow to noise ratio of 78 CFM at 37 dBA. If the thermal design needs more airflow than 78 CFM at that acoustic level, a different fan is required. If the target noise floor is lower than 37 dBA at full speed, this model will exceed it.
| Brand | Bgears |
|---|---|
| Model | b-PWM 80 Blue |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | 2 Ball |
| RPM | 500 to 4000 RPM +/- 10% |
| Air Flow | 78 CFM |
| Noise Level | 37 dBA |
| Power Connector | 3 / 4 Pin |
| Color | Blue |
| Features | Extreme airflow range for ultimate cooling and control 2 Ball Bearing designed for high speed high performance Better cooling and silent system performance thru PWM fan speed control 15 aerodynamic design fan blades for better airflow and stability 15 translucent blades This fan can also be directly connected to a standard mini 3 pin connector on the motherboard or fan controllers Mini 4 pin connector, 3 to 4 pin Molex adapter and 4 screws included |
| Dimensions | 80.00 x 80.00 x 25.00 mm |
| Teža pošiljke | 0.12 kg |
| Velikost pošiljke | 204 × 142 × 38 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Use your motherboard BIOS or fan-control software to monitor the reported RPM; it should read between 500 and 4000 RPM with a tolerance of 10% and the noise should stay near 37 dBA at typical speeds.
The package includes the 80mm fan, a mini 4-pin PWM connector, a 3-to-4-pin Molex adapter and four mounting screws; no separate controller is required because PWM speed control is handled by the motherboard header.
This single model — b-PWM 80 Blue — matches those specs: 80mm frame, 15 translucent blue blades, 2-ball bearing, 78 CFM airflow and 37 dBA noise.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?