Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black rectangular adapter box with USB 3.0 cable and SATA IDE connectors visible

BONAEVER

BONAEVER USB 3.0 to SATA IDE hard drive adapter

SKU CH-SR3H-3WCZ7

Connects 2.5" and 3.5" SATA and IDE drives via USB 3.0 for data transfer with a 12 V power adapter included

  • Case TypeProtection Case
  • Connect 2.5" and 3.5" SATA and IDE drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Power 3.5" drives reliably with included 12 V adapter
  • Works with Windows, Mac and Linux without drivers
  • Compact design fits in a laptop bag for portable access

Universal USB 3.0 to SATA and IDE Adapter

This adapter connects 2.5-inch and 3.5-inch SATA or IDE hard drives and optical drives to a USB port on Windows, Mac or Linux systems. It is aimed at technicians and home users who need quick access to bare drives for data recovery, duplication or archiving without installing them inside a case.

Capacity support and transfer headroom

The USB 3.0 interface delivers up to 5 Gbps bandwidth and the adapter handles SATA and IDE drives up to 5 TB. A supplied 12 V power adapter with an individual on/off switch provides stable power for 3.5-inch drives, while 2.5-inch units can run from the USB bus alone. Performance drops to USB 2.0 or 1.1 speeds when connected to older ports.

Replaces internal drive bays and legacy docks

It removes the need for spare SATA or IDE ports inside a desktop and supersedes single-protocol docks that only accept one drive type. The three-connector design lets you swap between 40-pin IDE, 44-pin IDE and SATA devices instantly. The jump is worthwhile when you regularly service mixed-age drives; it adds no value if you only ever use modern SATA SSDs.

Kohokohdat

  • Connect 2.5" and 3.5" SATA and IDE drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Power 3.5" drives reliably with included 12 V adapter
  • Works with Windows, Mac and Linux without drivers
  • Compact design fits in a laptop bag for portable access

Tekniset tiedot

Case TypeProtection Case

Kysymyksiä tästä tuotteesta

Will the adapter work with the 3.5" IDE drives I already own?

Yes, it supports both 2.5" and 3.5" IDE hard drives using the 40-pin and 44-pin connectors included on the device.

How can I confirm the USB 3.0 connection is running at full speed?

Check your operating system's device manager or system report to verify the drive is enumerated as a SuperSpeed USB device.

Does the kit include the power supply needed for 3.5" drives?

A 12V DC power adapter with individual on/off switches is supplied to power 3.5" SATA and IDE drives.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.