Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black rectangular adapter box with USB 3.0 cable and SATA IDE connectors visible

BONAEVER

BONAEVER USB 3.0 to SATA IDE hard drive adapter

SKU CH-SR3H-3WCZ7

Connects 2.5" and 3.5" SATA and IDE drives via USB 3.0 for data transfer with a 12 V power adapter included

  • Case TypeProtection Case
  • Connect 2.5" and 3.5" SATA and IDE drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Power 3.5" drives reliably with included 12 V adapter
  • Works with Windows, Mac and Linux without drivers
  • Compact design fits in a laptop bag for portable access

Universal USB 3.0 to SATA and IDE Adapter

This adapter connects 2.5-inch and 3.5-inch SATA or IDE hard drives and optical drives to a USB port on Windows, Mac or Linux systems. It is aimed at technicians and home users who need quick access to bare drives for data recovery, duplication or archiving without installing them inside a case.

Capacity support and transfer headroom

The USB 3.0 interface delivers up to 5 Gbps bandwidth and the adapter handles SATA and IDE drives up to 5 TB. A supplied 12 V power adapter with an individual on/off switch provides stable power for 3.5-inch drives, while 2.5-inch units can run from the USB bus alone. Performance drops to USB 2.0 or 1.1 speeds when connected to older ports.

Replaces internal drive bays and legacy docks

It removes the need for spare SATA or IDE ports inside a desktop and supersedes single-protocol docks that only accept one drive type. The three-connector design lets you swap between 40-pin IDE, 44-pin IDE and SATA devices instantly. The jump is worthwhile when you regularly service mixed-age drives; it adds no value if you only ever use modern SATA SSDs.

Puncte forte

  • Connect 2.5" and 3.5" SATA and IDE drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Power 3.5" drives reliably with included 12 V adapter
  • Works with Windows, Mac and Linux without drivers
  • Compact design fits in a laptop bag for portable access

Specificații

Case TypeProtection Case

Întrebări despre acest articol

Will the adapter work with the 3.5" IDE drives I already own?

Yes, it supports both 2.5" and 3.5" IDE hard drives using the 40-pin and 44-pin connectors included on the device.

How can I confirm the USB 3.0 connection is running at full speed?

Check your operating system's device manager or system report to verify the drive is enumerated as a SuperSpeed USB device.

Does the kit include the power supply needed for 3.5" drives?

A 12V DC power adapter with individual on/off switches is supplied to power 3.5" SATA and IDE drives.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.