BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027802BTC
Varastossa
Brute Networks
Brute Networks 16GB DDR4-2133 ECC UDIMM 2Rx8 CL15 1.2V 797259-091-BN server RAM
16 GB DDR4-2133 ECC UDIMM with CL15 latency, 1.2 V operation and HP part 797259-091 compatibility for servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 16GB DDR4-2133 ECC UDIMM adds reliable server capacity
- CL15 latency at 1.20V keeps power draw low
- 2Rx8 dual-rank layout boosts memory bandwidth
- HP 797259-091 compatible drop-in replacement fits existing bays
- Major-brand Samsung, SK Hynix or Micron chips ensure quality
Brute Networks 16GB DDR4-2133 ECC UDIMM
This is a 16GB DDR4-2133 ECC unbuffered DIMM built with major-brand chips. It runs at PC4-17000 with CL15 latency and 1.20V. The module matches HP part 797259-091 and carries a lifetime warranty from Brute Networks.
Suits HP servers needing ECC UDIMMs.
This module fits HP systems that accept 288-pin DDR4 ECC UDIMMs at 2133 MT/s. It will not work in platforms that require registered or load-reduced DIMMs, nor in boards limited to non-ECC memory. Buyers needing higher densities or faster speeds must select a different module.
2Rx8 organisation decides compatibility
The dual-rank 2Rx8 layout determines whether the memory controller can address the full 16GB. Check the server documentation to confirm support for this rank configuration before ordering.
Kohokohdat
- 16GB DDR4-2133 ECC UDIMM adds reliable server capacity
- CL15 latency at 1.20V keeps power draw low
- 2Rx8 dual-rank layout boosts memory bandwidth
- HP 797259-091 compatible drop-in replacement fits existing bays
- Major-brand Samsung, SK Hynix or Micron chips ensure quality
Tekniset tiedot
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Kysymyksiä tästä tuotteesta
How do I install this 288-Pin DDR4 UDIMM and what step do people miss?
Align the notch on the 288-Pin DDR4 module with the slot key, press straight down until both side clips click, then verify the system reports 16GB at 2133 MT/s and ECC active.
What maintenance or replacement will this ECC UDIMM need over its service life?
No scheduled maintenance is required; the module carries a lifetime warranty and should only be replaced if memory diagnostics report uncorrectable errors or capacity needs change.
What limit appears first when this 1.20V 2Rx8 kit runs sustained workloads?
The JEDEC 1.20V voltage ceiling and CL15 timing at 2133 MT/s set the thermal and stability boundary before any higher frequency or lower latency profile can be applied.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00280606BTC
Varastossa
