Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 memory module with gold contacts and black chips

Brute Networks

Brute Networks Dell Compatible 8GB DDR4-2666 ECC UDIMM SNPD715XC/8G-BN

SKU CH-KH0B-71WQX

8GB DDR4-2666 ECC UDIMM with CL15 timing and 1.2V operation for Dell servers

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnregistered
  • 8GB DDR4-2666 ECC UDIMM expands server memory capacity
  • 2 V operation reduces power draw per module
  • CL15 latency supports responsive data access
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell-compatible validated equivalent to SNPD715XC/8G

Dell-compatible 8 GB DDR4-2666 ECC UDIMM

This module is an 8 GB DDR4-2666 ECC UDIMM built to Dell part number SNPD715XC/8G. It runs at PC4-21300 speed with CL15 latency and 1.20 V operation. The unregistered design uses a 1Rx8 organisation and major-brand chips. It is intended for servers and workstations that require error-correcting memory.

Suits admins upgrading compatible Dell systems

Buyers who need registered DIMMs, higher capacities, or faster speeds should look elsewhere. Systems that only accept non-ECC memory cannot use this module. Environments requiring load-reduced or fully buffered designs are not supported by this unregistered UDIMM.

Verify DDR4 UDIMM slots and ECC support

Check that the motherboard accepts unregistered ECC UDIMMs at 2666 MT/s and 1.2 V. Confirm the slot count and maximum capacity per slot from the system manual. Ensure the BIOS is current enough to recognise the module. Matching kits are supplied identically for multi-channel configurations.

Kohokohdat

  • 8GB DDR4-2666 ECC UDIMM expands server memory capacity
  • 2 V operation reduces power draw per module
  • CL15 latency supports responsive data access
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell-compatible validated equivalent to SNPD715XC/8G

Tekniset tiedot

BrandDell
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

What motherboard slot and voltage does this DDR4-2666 ECC UDIMM require?

It fits a standard DDR4 UDIMM slot and runs at 1.2 V, so the board must support DDR4 unbuffered ECC memory at that voltage.

Can I mix this CL15 2666 MHz module with slower DDR4 ECC UDIMMs already in my Dell server?

Yes, the system will clock all modules to the lowest common speed and latency, so slower sticks will work but overall bandwidth drops to their level.

How do I confirm the module is detected at 2666 MHz with ECC active after installation?

Check the BIOS memory information or run a tool like dmidecode; it should show 2666 MT/s, 8 GB, ECC enabled and the correct part number.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.