Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

Brute Networks

Brute Networks Dell Compatible 8GB DDR4-2666 ECC UDIMM SNPD715XC/8G-BN

SKU CH-KH0B-71WQX

8GB DDR4-2666 ECC UDIMM with CL15 timing and 1.2V operation for Dell servers

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnregistered
  • 8GB DDR4-2666 ECC UDIMM expands server memory capacity
  • 2 V operation reduces power draw per module
  • CL15 latency supports responsive data access
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell-compatible validated equivalent to SNPD715XC/8G

Dell-compatible 8 GB DDR4-2666 ECC UDIMM

This module is an 8 GB DDR4-2666 ECC UDIMM built to Dell part number SNPD715XC/8G. It runs at PC4-21300 speed with CL15 latency and 1.20 V operation. The unregistered design uses a 1Rx8 organisation and major-brand chips. It is intended for servers and workstations that require error-correcting memory.

Suits admins upgrading compatible Dell systems

Buyers who need registered DIMMs, higher capacities, or faster speeds should look elsewhere. Systems that only accept non-ECC memory cannot use this module. Environments requiring load-reduced or fully buffered designs are not supported by this unregistered UDIMM.

Verify DDR4 UDIMM slots and ECC support

Check that the motherboard accepts unregistered ECC UDIMMs at 2666 MT/s and 1.2 V. Confirm the slot count and maximum capacity per slot from the system manual. Ensure the BIOS is current enough to recognise the module. Matching kits are supplied identically for multi-channel configurations.

Points forts

  • 8GB DDR4-2666 ECC UDIMM expands server memory capacity
  • 2 V operation reduces power draw per module
  • CL15 latency supports responsive data access
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell-compatible validated equivalent to SNPD715XC/8G

Caractéristiques

BrandDell
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
ChipsetMajor Brand Chipset

Questions sur cet article

What motherboard slot and voltage does this DDR4-2666 ECC UDIMM require?

It fits a standard DDR4 UDIMM slot and runs at 1.2 V, so the board must support DDR4 unbuffered ECC memory at that voltage.

Can I mix this CL15 2666 MHz module with slower DDR4 ECC UDIMMs already in my Dell server?

Yes, the system will clock all modules to the lowest common speed and latency, so slower sticks will work but overall bandwidth drops to their level.

How do I confirm the module is detected at 2666 MHz with ECC active after installation?

Check the BIOS memory information or run a tool like dmidecode; it should show 2666 MT/s, 8 GB, ECC enabled and the correct part number.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.