Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Computer Memory Solutions

Computer Memory Solutions 4GB (2×2GB) DDR2 5300 667MHz DIMM Intel DG31PR A88

SKU CH-7G8M-15650

4GB DDR2-667 kit with two 2GB unbuffered DIMMs for Intel DG31PR motherboards

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 4GB total capacity for multitasking headroom with two 2GB modules
  • 667MHz DDR2 speed matches PC2-5300 system bus for stable operation
  • 8V standard voltage ensures compatibility with Intel DG31PR motherboard
  • 240-pin unbuffered non-ECC DIMM form factor fits desktop memory slots
  • 2Rx8 rank configuration using major-brand chips for reliable data integrity

System-Specific DDR2 Kit

This 4 GB kit contains two 2 GB DDR2 DIMMs built for the Intel DG31PR motherboard. Each module is a 240-pin unbuffered non-ECC stick rated at 667 MHz with CL5 5-5-5 timings. The set targets owners of that specific board who need a straightforward capacity increase.

Thermals Noise Power

Standard 1.8 V DDR2 modules without heat spreaders run cool and silent in normal desktop workloads. Power draw stays low because the chips operate at the native DDR2 voltage and the board’s memory controller manages the two ranks without extra buffering. No active cooling is required.

Deciding Specification

The kit is validated only for the Intel DG31PR platform, which supports a maximum of 8 GB across four sockets. Builders using any other motherboard or needing ECC, registered or faster DDR2 modules cannot use this memory.

Kohokohdat

  • 4GB total capacity for multitasking headroom with two 2GB modules
  • 667MHz DDR2 speed matches PC2-5300 system bus for stable operation
  • 8V standard voltage ensures compatibility with Intel DG31PR motherboard
  • 240-pin unbuffered non-ECC DIMM form factor fits desktop memory slots
  • 2Rx8 rank configuration using major-brand chips for reliable data integrity

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM256645300DIMMDR
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel Dg31Pr Motherboard
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How do I install the 240-pin DDR2 DIMMs in the Intel DG31PR and what step do people often miss?

Align the notch on each 240-pin module with the slot key, press down firmly until both side clips click, then verify the BIOS shows the full 4 GB at 667 MHz; the step often missed is seating both sticks fully so the clips engage.

What maintenance or replacement will the unbuffered non-ECC DDR2 kit need later?

No scheduled maintenance is required; if a module fails, replace it with another 2 GB DDR2 667 MHz CL5 1.8 V unbuffered DIMM to keep timing matched.

What limit appears first when the Intel DG31PR runs this memory under sustained load?

The board’s four-slot, 8 GB maximum capacity is reached before the memory’s own speed or voltage limits become a factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.