Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR2 DIMM sticks with black chips, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 4GB (2×2GB) DDR2 5300 667MHz DIMM Intel DG31PR A88

SKU CH-7G8M-15650

4GB DDR2-667 kit with two 2GB unbuffered DIMMs for Intel DG31PR motherboards

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 4GB total capacity for multitasking headroom with two 2GB modules
  • 667MHz DDR2 speed matches PC2-5300 system bus for stable operation
  • 8V standard voltage ensures compatibility with Intel DG31PR motherboard
  • 240-pin unbuffered non-ECC DIMM form factor fits desktop memory slots
  • 2Rx8 rank configuration using major-brand chips for reliable data integrity

System-Specific DDR2 Kit

This 4 GB kit contains two 2 GB DDR2 DIMMs built for the Intel DG31PR motherboard. Each module is a 240-pin unbuffered non-ECC stick rated at 667 MHz with CL5 5-5-5 timings. The set targets owners of that specific board who need a straightforward capacity increase.

Thermals Noise Power

Standard 1.8 V DDR2 modules without heat spreaders run cool and silent in normal desktop workloads. Power draw stays low because the chips operate at the native DDR2 voltage and the board’s memory controller manages the two ranks without extra buffering. No active cooling is required.

Deciding Specification

The kit is validated only for the Intel DG31PR platform, which supports a maximum of 8 GB across four sockets. Builders using any other motherboard or needing ECC, registered or faster DDR2 modules cannot use this memory.

Najważniejsze cechy

  • 4GB total capacity for multitasking headroom with two 2GB modules
  • 667MHz DDR2 speed matches PC2-5300 system bus for stable operation
  • 8V standard voltage ensures compatibility with Intel DG31PR motherboard
  • 240-pin unbuffered non-ECC DIMM form factor fits desktop memory slots
  • 2Rx8 rank configuration using major-brand chips for reliable data integrity

Specyfikacja

BrandComputer Memory Solutions
ModelCM256645300DIMMDR
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel Dg31Pr Motherboard
Package Content2 Memory RAM Sticks

Pytania dotyczące tego produktu

How do I install the 240-pin DDR2 DIMMs in the Intel DG31PR and what step do people often miss?

Align the notch on each 240-pin module with the slot key, press down firmly until both side clips click, then verify the BIOS shows the full 4 GB at 667 MHz; the step often missed is seating both sticks fully so the clips engage.

What maintenance or replacement will the unbuffered non-ECC DDR2 kit need later?

No scheduled maintenance is required; if a module fails, replace it with another 2 GB DDR2 667 MHz CL5 1.8 V unbuffered DIMM to keep timing matched.

What limit appears first when the Intel DG31PR runs this memory under sustained load?

The board’s four-slot, 8 GB maximum capacity is reached before the memory’s own speed or voltage limits become a factor.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.