Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR2 memory sticks, 240-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR2 5300 667MHz ECC Fully Buffered DIMM memory upgrade

SKU CH-HDWE-VPRKX

A 4 GB DDR2 kit with ECC fully buffered DIMMs for Apple Mac Pro 3.2 GHz Xeon systems

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • ECC protection prevents data corruption in critical workloads
  • Fully Buffered DIMM architecture supports high-capacity server configurations
  • 667 MHz DDR2 speed matches Mac Pro system requirements
  • 2 x 2 GB kit enables dual-channel installation
  • Compatible with Apple Mac Pro Xeon 2.8, 3.0, 3.2 GHz models

Kit for Apple Mac Pro Quad Core 3.2GHz

This 4GB kit contains two 2GB DDR2-667 fully buffered DIMMs built for the Apple Mac Pro Quad Core 3.2GHz. The modules use 240-pin DDR2 SDRAM with ECC and run at 1.8V. They are intended for server-grade memory slots in this specific workstation.

Fully buffered DDR2 ECC requirement

The Mac Pro Quad Core 3.2GHz requires fully buffered DDR2 ECC memory; standard unbuffered or non-ECC DDR2 will not function. These modules meet the CL5 5-5-5 timing and PC2-5300 specification demanded by the system's memory controller.

Capacity and headroom

Each of the two memory cards accepts four modules for a maximum of 16GB per card and 64GB total across eight slots. This 4GB kit occupies two slots; the remaining six slots allow further expansion up to the 64GB ceiling supported by third-party configurations.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Fully Buffered DIMM architecture supports high-capacity server configurations
  • 667 MHz DDR2 speed matches Mac Pro system requirements
  • 2 x 2 GB kit enables dual-channel installation
  • Compatible with Apple Mac Pro Xeon 2.8, 3.0, 3.2 GHz models

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM256725300FBDIMM
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Mac Pro Quad Core 3.2Ghz
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How does the 667 MHz speed affect real-world performance in a Mac Pro?

The modules run at DDR2-667 (PC2-5300) with CL5 timing, matching the memory controller on the 2.8, 3.0 and 3.2 GHz Xeon models so the system operates at its rated bandwidth.

What does the fully buffered DIMM interface mean for compatibility and capacity?

Fully Buffered DIMM architecture is required by the Mac Pro memory cards; the kit installs in pairs across the eight slots, supporting up to 64 GB when all slots are populated with compatible modules.

What physical requirements must the Mac Pro meet to accept these 240-pin modules?

The Mac Pro uses 240-pin DDR2 FB-DIMM slots on dedicated memory cards; a special heat sink is required and modules must be installed in matched pairs per card.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.